Procurar categorias
Phoenix Contact AXL SE CNT1 módulo de função
Descricao
Phoenix Contact AXL SE CNT1 integra a linha Axioline Smart Elements como módulo de função. O produto é encaixado em um slot Smart Element e tem grau de proteção IP20.
Especificacoes
| Brand | Phoenix Contact |
|---|---|
| Model | AXL SE CNT1 |
| Order Number | 1088131 |
| Supply voltage | using card edge connectors |
| Resolution | 32 bits |
| Input voltage | 24 V DC |
| Input current | typ. 2.3 mA |
| Input frequency | max. 150 kHz |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Degree of protection | IP20 |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| CO2e kg | 2.461 kg CO2e |
| Color (Housing) | gray (RAL 7042) |
| Conductor cross-section AWG | 24 ... 16 |
| Conductor cross-section, flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, rigid | 0.25 mm² ... 1.5 mm² |
| Connection method | Card edge connector |
| Connection method | Push-in connection |
| Connection name | I/O |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Current consumption | min. 20 mA (without connected peripherals) |
| Current draw | max. 700 mA |
| Current draw | typ. 620 mA |
| Depth | 62 mm |
| Description of the input | EN 61131-2 type 1 |
| Designation | Sensor/actuator supply U S |
| ECLASS-13.0 | 27242605 |
| ECLASS-15.0 | 27242605 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001601 |
| Exemption | 7(a), 7(c)-I |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 62.2 mm |
| Input address area | 6 Byte |
| Input name | Counter input |
| Input voltage range "0" signal | -3 V DC ... 5 V DC |
| Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Maximum power dissipation for nominal condition | 1.75 W |
| Minimum order quantity | 1 pc |
| Mounting position | See the system in which the Smart Element is used. |
| Mounting type | Plug-in mounting (Smart Element slot) |
| Number of inputs | 1 (Source) |
| Number of interfaces | 1 |
| Number of outputs | 1 (OUT) |
| Output address area | 6 Byte |
| Output description | Push-pull output (switches to GND at level 0) |
| Output name | Digital output |
| Output voltage | 24 V DC |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Packing unit | 1 pc |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Process data channel | 48 bit |
| Product key | DRIB63 |
| Product type | I/O component |
| Protection | See the system in which the Smart Element is used. |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Protective circuit | Short-circuit and overload protection; electronic |
| Protective circuit | Surge protection; Suppressor diode |
| Protective circuit | Surge protection; See the system in which the Smart Element is used. |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Required configuration data | 7 Byte |
| Required parameter data | 20 Byte |
| Scip | 468fdef8-cfcd-458e-a095-dae07f558968 |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Start time until ready to operate | < 500 ms |
| Stripping length | 8 mm |
| Supply voltage | 24 V DC (using card edge connectors) |
| Supply voltage | 24 V DC |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Type | modular |
| UNSPSC 21.0 | 32151600 |
| Weight per piece (excluding packing) | 34.6 g |
| Weight per piece (including packing) | 35.1 g |
| Width | 14.9 mm |