コンテンツへスキップ

Phoenix Contact AXL SE CNT1 機能モジュール

Phoenix Contact AXL SE CNT1 機能モジュール

見積もりを依頼

数量、希望状態、配送先を入力してください。

見積もりを依頼

説明

Phoenix Contact AXL SE CNT1 は Axioline Smart Elements シリーズの機能モジュールです。 Smart Element スロットに差し込みます。保護等級は IP20 です。

仕様

Brand Phoenix Contact
Model AXL SE CNT1
Order Number 1088131
Supply voltage using card edge connectors
Resolution 32 bits
Input voltage 24 V DC
Input current typ. 2.3 mA
Input frequency max. 150 kHz
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Degree of protection IP20
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 5g
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
CO2e kg 2.461 kg CO2e
Color (Housing) gray (RAL 7042)
Conductor cross-section AWG 24 ... 16
Conductor cross-section, flexible 0.25 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross-section, rigid 0.25 mm² ... 1.5 mm²
Connection method Card edge connector
Connection method Push-in connection
Connection name I/O
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 10g
Current consumption min. 20 mA (without connected peripherals)
Current draw max. 700 mA
Current draw typ. 620 mA
Depth 62 mm
Description of the input EN 61131-2 type 1
Designation Sensor/actuator supply U S
ECLASS-13.0 27242605
ECLASS-15.0 27242605
Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
ETIM 10.0 EC001601
Exemption 7(a), 7(c)-I
Fulfills EU RoHS substance requirements Yes
Height 62.2 mm
Input address area 6 Byte
Input name Counter input
Input voltage range "0" signal -3 V DC ... 5 V DC
Input voltage range "1" signal 15 V DC ... 30 V DC
Maximum power dissipation for nominal condition 1.75 W
Minimum order quantity 1 pc
Mounting position See the system in which the Smart Element is used.
Mounting type Plug-in mounting (Smart Element slot)
Number of inputs 1 (Source)
Number of interfaces 1
Number of outputs 1 (OUT)
Output address area 6 Byte
Output description Push-pull output (switches to GND at level 0)
Output name Digital output
Output voltage 24 V DC
Overvoltage category II (IEC 60664-1, EN 60664-1)
Packing unit 1 pc
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Process data channel 48 bit
Product key DRIB63
Product type I/O component
Protection See the system in which the Smart Element is used.
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Protective circuit Short-circuit and overload protection; electronic
Protective circuit Surge protection; Suppressor diode
Protective circuit Surge protection; See the system in which the Smart Element is used.
Protective circuit Reverse polarity protection; Polarity protection diode
Required configuration data 7 Byte
Required parameter data 20 Byte
Scip 468fdef8-cfcd-458e-a095-dae07f558968
Shock in accordance with EN 60068-2-27/IEC 60068-2-27 30g
Special properties The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Start time until ready to operate < 500 ms
Stripping length 8 mm
Supply voltage 24 V DC (using card edge connectors)
Supply voltage 24 V DC
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Type modular
UNSPSC 21.0 32151600
Weight per piece (excluding packing) 34.6 g
Weight per piece (including packing) 35.1 g
Width 14.9 mm