Explorar categorias
Phoenix Contact AXL SE CNT1 módulo de función
Descripcion
Phoenix Contact AXL SE CNT1 forma parte de la gama Axioline Smart Elements como módulo de función. El producto se inserta en una ranura Smart Element y tiene protección IP20.
Especificaciones
| Brand | Phoenix Contact |
|---|---|
| Model | AXL SE CNT1 |
| Order Number | 1088131 |
| Supply voltage | using card edge connectors |
| Resolution | 32 bits |
| Input voltage | 24 V DC |
| Input current | typ. 2.3 mA |
| Input frequency | max. 150 kHz |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Degree of protection | IP20 |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| CO2e kg | 2.461 kg CO2e |
| Color (Housing) | gray (RAL 7042) |
| Conductor cross-section AWG | 24 ... 16 |
| Conductor cross-section, flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, rigid | 0.25 mm² ... 1.5 mm² |
| Connection method | Card edge connector |
| Connection method | Push-in connection |
| Connection name | I/O |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Current consumption | min. 20 mA (without connected peripherals) |
| Current draw | max. 700 mA |
| Current draw | typ. 620 mA |
| Depth | 62 mm |
| Description of the input | EN 61131-2 type 1 |
| Designation | Sensor/actuator supply U S |
| ECLASS-13.0 | 27242605 |
| ECLASS-15.0 | 27242605 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001601 |
| Exemption | 7(a), 7(c)-I |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 62.2 mm |
| Input address area | 6 Byte |
| Input name | Counter input |
| Input voltage range "0" signal | -3 V DC ... 5 V DC |
| Input voltage range "1" signal | 15 V DC ... 30 V DC |
| Maximum power dissipation for nominal condition | 1.75 W |
| Minimum order quantity | 1 pc |
| Mounting position | See the system in which the Smart Element is used. |
| Mounting type | Plug-in mounting (Smart Element slot) |
| Number of inputs | 1 (Source) |
| Number of interfaces | 1 |
| Number of outputs | 1 (OUT) |
| Output address area | 6 Byte |
| Output description | Push-pull output (switches to GND at level 0) |
| Output name | Digital output |
| Output voltage | 24 V DC |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Packing unit | 1 pc |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Process data channel | 48 bit |
| Product key | DRIB63 |
| Product type | I/O component |
| Protection | See the system in which the Smart Element is used. |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Protective circuit | Short-circuit and overload protection; electronic |
| Protective circuit | Surge protection; Suppressor diode |
| Protective circuit | Surge protection; See the system in which the Smart Element is used. |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Required configuration data | 7 Byte |
| Required parameter data | 20 Byte |
| Scip | 468fdef8-cfcd-458e-a095-dae07f558968 |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Start time until ready to operate | < 500 ms |
| Stripping length | 8 mm |
| Supply voltage | 24 V DC (using card edge connectors) |
| Supply voltage | 24 V DC |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Type | modular |
| UNSPSC 21.0 | 32151600 |
| Weight per piece (excluding packing) | 34.6 g |
| Weight per piece (including packing) | 35.1 g |
| Width | 14.9 mm |