浏览分类
Phoenix Contact PSR-SCP- 24UC/ESAM4/3X1/1X2/B 安全继电器
说明
Phoenix Contact PSR-SCP- 24UC/ESAM4/3X1/1X2/B 面向急停回路，属于 PSRclassic 系列，可安装在 DIN 导轨上，防护等级 IP20。
规格参数
| Brand | Phoenix Contact |
|---|---|
| Model | PSR-SCP- 24UC/ESAM4/3X1/1X2/B |
| Order Number | 2900509 |
| Inrush current | < 3.5 A (typ. with U S, Δt = 3 ms) |
| Switching frequency | max. 0.5 Hz |
| Limiting continuous current | 6 A |
| Power consumption at U S | typ. 1.68 W |
| Rated insulation voltage | 250 V |
| Sq. Total current | 72 A 2 (observe derating) |
| Switching voltage | min. 10 V AC/DC |
| Degree of protection | IP20 |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Application | Emergency stop |
| Application | Safety door |
| CO2e kg | 5.021 kg CO2e |
| Color (Housing) | yellow (RAL 1018) |
| Concurrence | ∞ |
| Conductor cross-section AWG | 24 ... 12 |
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section rigid | 0.2 mm² ... 2.5 mm² |
| Connection method | Screw connection |
| Contact material | AgSnO 2 |
| Contact switching type | 3 enabling current paths |
| Contact switching type | 1 signaling current path |
| Control | 2-channel |
| Current consumption | 38 mA (typ. with U S at S12) |
| Current consumption | -38 mA (typ. with U S at S22) |
| Current consumption | 0 mA (typ. with U S at S34) |
| Current consumption | 1 mA (typ. with U S at S35) |
| Degree of pollution | 2 |
| Depth | 114.5 mm |
| Description of the input | safety-related |
| Description of the input | non-safety-related |
| ECLASS-13.0 | 27371819 |
| ECLASS-15.0 | 27371819 |
| ECLASS-15.0 ASSET | 27250101 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001449 |
| Exemption | 7(a), 7(c)-I |
| Filter time | 5 ms (in the event of voltage dips at U s ) |
| Filter time | No test pulses permitted |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 99 mm |
| Housing material | PA |
| Identification | CE-compliant |
| Input current range "0" signal | 0 mA ... 2 mA |
| Input voltage range "0" signal | 0 V DC ... 5 V DC (S12) |
| Input voltage range "1" signal | 20.4 V ... 26.4 V (S12) |
| Input voltage range "1" signal | 20.4 V ... 26.4 V |
| Inrush current | < 100 mA (Δt = 500 ms, with U s /I x at S12) |
| Inrush current | > -100 mA (Δt = 300 ms, with U s /I x at S22) |
| Inrush current | < 6 mA (typ. with U S at S34/35) |
| Inrush current | min. 10 mA |
| Inrush current | max. 6 A |
| Interrupting rating (ohmic load) max. | Observe derating and load limit curve |
| Limiting continuous current | 6 A (Signaling current path) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible overall conductor resistance | 50 Ω |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Maximum power dissipation for nominal condition | 16.44 W (U S = 26.4 V, I L ² = 72 A², P Total max = 2.04 W + 14.4 W) |
| Mechanical service life | approx. 10 7 cycles |
| Mechanical service life | 10 7 cycles |
| Min. degree of protection of inst. location | IP54 |
| Minimum order quantity | 1 pc |
| Mounting position | vertical or horizontal |
| Mounting type | DIN rail mounting |
| Nominal operating mode | 100% operating factor |
| Number of inputs | 2 |
| Number of outputs | 3 |
| Number of outputs | 1 |
| Operating voltage display | 1 x LED (green) |
| Output description | 2 N/O contacts in series, safety-related, floating |
| Output description | 2 N/C contacts parallel, non-safety-related, floating |
| Output fuse | 10 A gL/gG (High demand) |
| Output fuse | 4 A gL/gG (Low demand) |
| Output fuse | 6 A gL/gG |
| Overvoltage category | III |
| Packing unit | 1 pc |
| Performance level (PL) | e (5 A DC13; 5 A AC15; 8760 switching cycles/year) |
| Pluggable | yes |
| Product key | DNA114 |
| Product type | Safety relays |
| Protective circuit | Serial protection against polarity reversal; Suppressor diode |
| Protective circuit | Suppressor diode |
| Rated control circuit supply voltage U S | 24 V DC -15 % / +10 % |
| Rated control supply current I S | typ. 70 mA (at U S ) |
| Rated surge voltage/insulation | See data sheet, section “Insulation coordination”. |
| Recovery time | < 1 s (following demand of the safety function) |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Restart time | < 1 s (Boot time) |
| Safety Integrity Level (SIL) | 3 |
| Scip | c5628219-0111-45f5-ad67-02317d0643d9 |
| Screw thread | M3 |
| Set comprises | 1449149 PSR-SCP- 24UC/ESAM4/3X1/1X2/B-SET10 |
| Shock | 15g |
| Sq. Total current | 36 A 2 |
| Start pulse length | ≥ 500 ms (manual start) |
| Status display | 3 x LED (green) |
| Stop category (EN 60204-1) | 0 |
| Stripping length | 7 mm |
| Switching capacity | 5 A (AC 15) |
| Switching capacity | 6 A (DC 13) |
| Switching capacity | 1.5 A (AC 15) |
| Switching capacity | 2 A (DC 13) |
| Switching power | min. 100 mW |
| Switching voltage | max. 250 V AC/DC |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Typ. starting time with U s | typ. 250 ms (with Us / when controlled via A1) |
| Typical release time | typ. 20 ms (At Us on demand via sensor circuit) |
| Typical release time | typ. 45 ms (At Us/on demand via A1) |
| Typical response time | typ. 150 ms (For U s autostart) |
| Typical response time | typ. 100 ms (For U s manual, monitored start) |
| UNSPSC 21.0 | 39122205 |
| Weight per piece (excluding packing) | 161.1 g |
| Weight per piece (including packing) | 191.91 g |
| Width | 22.5 mm |