Ir para o conteudo

Phoenix Contact IB IL 24 DO 16-PAC/SN 2862961 Módulo de E/S - Novo

Phoenix Contact IB IL 24 DO 16-PAC/SN 2862961 Módulo de E/S - Novo

Solicitar cotacao

Quantidade, condicao e destino.

Solicitar cotacao

Descricao

Módulo de E/S Phoenix Contact IB IL 24 DO 16-PAC/SN 2862961 novo.

Especificacoes

Brand Phoenix Contact
Model IB IL 24 DO 16-PAC/SN
MPN 2862961
Supply voltage 7.5 V DC (via voltage jumper)
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Output current max. 500 mA (per channel)
Maximum inrush current max. 1.5 A (at nominal lamp load for 20 ms)
Nominal output voltage 24 V DC
Resistance to permanent reverse voltage max. 2 A DC
Transmission speed 500 kbps
Degree of protection IP20
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 5g
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
Air pressure (operation) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport) 70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Behavior at voltage switch-off The output follows the power supply without delay
Behavior with inductive overload Output can be destroyed
Behavior with overload Auto restart
Color (Housing) green (RAL 6021)
Conductor cross-section AWG 28 ... 16
Conductor cross-section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross-section, rigid 0.08 mm² ... 1.5 mm²
Connection method Inline data jumper
Connection method Spring-cage connection
Connection name Inline connector
Connection technology 3-conductor
Current draw max. 90 mA
Current draw max. 8 A
Depth 71.5 mm
Design of digital output Semiconductor
Diagnostics messages Short-circuit or overload of the digital outputs Error message in the diagnostic code (bus) and display (2 Hz) via the LED (D) on the module
ECLASS-13.0 27242604
ECLASS-15.0 27242604
Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
ETIM 10.0 EC001599
Exemption 7(a), 7(a)-I, 7(c)-I
Fulfills EU RoHS substance requirements Yes
Height 140.5 mm
ID code (dec.) 189
Input address area 0 Byte
Length code (dec) 01
Length code (hex) 01
Limitation of the voltage induced on circuit interruption -46 V ... -15 V
Maximum operating frequency with inductive nominal load max. 0.5 Hz (1.2 H, 48 Ω)
Maximum operating frequency with lamp nominal load max. 8 Hz (this switching frequency is limited by the number of bus devices, the structure of the bus, the software used and the control or computer system used)
Maximum operating frequency with ohmic nominal load max. 300 Hz (this switching frequency is limited by the number of bus devices, the structure of the bus, the software used and the control or computer system used)
Maximum power dissipation for nominal condition 3.4 W
Minimum order quantity 1 pc
Mounting type DIN rail mounting
No. of channels 16
Nominal load, inductive 12 W (1.2 H, 48 Ω)
Nominal load, lamp 12 W
Nominal load, ohmic 12 VA (48 Ω)
Number of interfaces 2
Number of outputs 16
One-time unsolicited energy 400 mJ
Operating mode Process data mode with one word
Output address area 2 Byte
Output current max. 8 A (Device)
Output current when switched off max. 300 µA
Output current with ground connection interrupt when switched off max. 25 mA
Output data validity typ. 5 ms (after switching the 24 V voltage supply (power up))
Output name Digital outputs
Output voltage 24 V DC (U S - 1 V)
Output voltage when switched off max. 2 V
Overcurrent shut-down min. 0.7 A
Overvoltage category II (IEC 60664-1, EN 60664-1)
Packing unit 1 pc
Parameter channel (PCP) 0 bit
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Process data channel 16 bit
Product key DRI132
Product type I/O component
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Protective circuit Overload protection, short-circuit protection of outputs; electronic
Reaction time with short-circuit ca. 3 s
Register length (bus) 16 bit
Required configuration data 4 Byte
Required parameter data 4 Byte
Restart frequency with lamp overload 400 Hz
Restart frequency with ohmic overload 400 Hz
Reverse voltage resistance to short pulses Reverse voltage proof
Scip 44b176d9-ad0c-4769-9d25-8a8817acc10f
Scope of supply including Inline connectors and marking fields, connectors numbered individually
Shock in accordance with EN 60068-2-27/IEC 60068-2-27 25g
Signal delay when switching off a lamp nominal load typ. 1 ms
Signal delay when switching off an inductive nominal load typ. 50 ms (1.2 H, 48 Ω)
Signal delay when switching off an ohmic nominal load typ. 1 ms
Signal delay when switching on a lamp nominal load typ. 100 ms (for switching frequencies up to 8 Hz, above this frequency, the lamp load behaves like an ohmic load)
Signal delay when switching on an inductive nominal load typ. 100 ms (1.2 H, 48 Ω)
Signal delay when switching on an ohmic nominal load typ. 500 µs
Special properties The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Stripping length 8 mm
Supply voltage 24 V DC (via voltage jumper)
Switching power with ground connection interrupt typ. 100 mW (at 1 kΩ load resistance)
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Type modular
UNSPSC 21.0 32151600
Weight per piece (excluding packing) 130 g
Weight per piece (including packing) 236.8 g
Width 48.8 mm