Ir para o conteudo

Phoenix Contact IB IL 24/230 DOR4/W-PC-PAC módulo de relé

Phoenix Contact IB IL 24/230 DOR4/W-PC-PAC módulo de relé

Solicitar cotacao

Quantidade, condicao e destino.

Solicitar cotacao

Descricao

Phoenix Contact IB IL 24/230 DOR4/W-PC-PAC integra a linha Inline como módulo de relé. O produto é montado em trilho DIN e tem grau de proteção IP20.

Especificacoes

Brand Phoenix Contact
Model IB IL 24/230 DOR4/W-PC-PAC
Order Number 2862181
Supply voltage 7.5 V DC (via voltage jumper)
Switching frequency max. 20 Hz (without load)
Inrush current max. 6 A (for 200 µs, with lamp loads and capacitive loads)
Limiting continuous current 3 A
Switching current max. 3 A (At 30 V DC)
Switching voltage min. 5 V DC
Transmission speed 500 kbps
Degree of protection IP20
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 2g
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Bouncing time typ. 5 ms
CO2e kg 3.707 kg CO2e
Coil resistance 119 Ω ±12 Ω (at 20 °C)
Color (Housing) gray (RAL 7042)
Common potentials all contacts floating
Conductor cross-section AWG 28 ... 16
Conductor cross-section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross-section, rigid 0.08 mm² ... 1.5 mm²
Connection method Inline data jumper
Connection method Spring-cage connection
Connection name Inline connector
Contact material AgSnO 2
Contact resistance ≤ 50 mΩ (at 100 mA/6 V)
Contact switching type Changeover contact
Current draw max. 187 mA
Depth 71.5 mm
ECLASS-13.0 27242604
ECLASS-15.0 27242604
Environment friendly use period (EFUP) EFUP-E No hazardous substances above the limits
ETIM 10.0 EC001599
Exemption 7(a), 7(c)-I
Fulfills EU RoHS substance requirements Yes
Height 119.8 mm
ID code (dec.) 189
Input address area 0 bit
Installation location Control cabinet
Length code (dec) 65
Length code (hex) 41
Maximum power dissipation for nominal condition 2.85 W
Mechanical service life 2x 10 7 cycles
Minimum order quantity 1 pc
Mounting type DIN rail mounting
Nominal output voltage (AC) 230 V AC
Nominal output voltage (DC) 24 V DC
Number of interfaces 2
Number of outputs 4 (floating)
Operating mode Process data operation with 4 bits
Output address area 4 bit
Output current (max. per channel) max. 3 A (per channel)
Output current (max. per module) max. 12 A (per module)
Output voltage range (AC) 5 V AC ... 253 V AC
Overvoltage category III (IEC 60664-1, EN 60664-1)
Packing unit 1 pc
Parameter channel (PCP) 0 bit
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Process data channel 4 bit
Product key DRI133
Product type I/O component
Protection class II (IEC 61140, EN 61140, VDE 0140-1) ()
Register length (bus) 4 bit
Required configuration data 4 Byte
Required parameter data 3 Byte
Scip ab63e6bf-75ca-4ed6-b456-ff1edb630650
Scope of supply including Inline connectors and marking fields
Service life electrical 10 5 switching cycles (at 20 switching cycles per minute)
Shock in accordance with EN 60068-2-27/IEC 60068-2-27 2g
Special properties The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Special properties for switching inductive and capacitive loads
Stripping length 8 mm
Switching current max. 0.15 A (for 250 V DC)
Switching frequency max. 0.1 Hz (with load)
Switching power max. 750 VA (see to derating)
Switching voltage max. 250 V DC
Switching voltage max. 253 V AC
Test voltage 1 kV, 50 Hz, 1 min
Test voltage 1 kV, 50 Hz, 1 min
Test voltage 4 kV, 50 Hz, 1 min
Type modular
Typical release time typ. 6 ms
Typical response time typ. 5 ms
UNSPSC 21.0 32151600
Weight per piece (excluding packing) 138 g
Weight per piece (including packing) 214.3 g
Width 48.8 mm