Aller au contenu

Phoenix Contact IB IL 24/230 DOR4/W-PC-PAC module relais

Phoenix Contact IB IL 24/230 DOR4/W-PC-PAC module relais

Demander un devis

Quantite, etat et destination.

Demander un devis

Description

Phoenix Contact IB IL 24/230 DOR4/W-PC-PAC fait partie de la gamme Inline en tant que module relais. Il se monte sur rail DIN et présente un indice de protection IP20.

Specifications

Brand Phoenix Contact
Model IB IL 24/230 DOR4/W-PC-PAC
Order Number 2862181
Supply voltage 7.5 V DC (via voltage jumper)
Switching frequency max. 20 Hz (without load)
Inrush current max. 6 A (for 200 µs, with lamp loads and capacitive loads)
Limiting continuous current 3 A
Switching current max. 3 A (At 30 V DC)
Switching voltage min. 5 V DC
Transmission speed 500 kbps
Degree of protection IP20
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 2g
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
Ambient temperature (operation) -25 °C ... 55 °C
Ambient temperature (storage/transport) -25 °C ... 85 °C
Bouncing time typ. 5 ms
CO2e kg 3.707 kg CO2e
Coil resistance 119 Ω ±12 Ω (at 20 °C)
Color (Housing) gray (RAL 7042)
Common potentials all contacts floating
Conductor cross-section AWG 28 ... 16
Conductor cross-section, flexible 0.08 mm² ... 1.5 mm²
Conductor cross-section, rigid 0.08 mm² ... 1.5 mm²
Connection method Inline data jumper
Connection method Spring-cage connection
Connection name Inline connector
Contact material AgSnO 2
Contact resistance ≤ 50 mΩ (at 100 mA/6 V)
Contact switching type Changeover contact
Current draw max. 187 mA
Depth 71.5 mm
ECLASS-13.0 27242604
ECLASS-15.0 27242604
Environment friendly use period (EFUP) EFUP-E No hazardous substances above the limits
ETIM 10.0 EC001599
Exemption 7(a), 7(c)-I
Fulfills EU RoHS substance requirements Yes
Height 119.8 mm
ID code (dec.) 189
Input address area 0 bit
Installation location Control cabinet
Length code (dec) 65
Length code (hex) 41
Maximum power dissipation for nominal condition 2.85 W
Mechanical service life 2x 10 7 cycles
Minimum order quantity 1 pc
Mounting type DIN rail mounting
Nominal output voltage (AC) 230 V AC
Nominal output voltage (DC) 24 V DC
Number of interfaces 2
Number of outputs 4 (floating)
Operating mode Process data operation with 4 bits
Output address area 4 bit
Output current (max. per channel) max. 3 A (per channel)
Output current (max. per module) max. 12 A (per module)
Output voltage range (AC) 5 V AC ... 253 V AC
Overvoltage category III (IEC 60664-1, EN 60664-1)
Packing unit 1 pc
Parameter channel (PCP) 0 bit
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 10 % ... 95 % (non-condensing)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Process data channel 4 bit
Product key DRI133
Product type I/O component
Protection class II (IEC 61140, EN 61140, VDE 0140-1) ()
Register length (bus) 4 bit
Required configuration data 4 Byte
Required parameter data 3 Byte
Scip ab63e6bf-75ca-4ed6-b456-ff1edb630650
Scope of supply including Inline connectors and marking fields
Service life electrical 10 5 switching cycles (at 20 switching cycles per minute)
Shock in accordance with EN 60068-2-27/IEC 60068-2-27 2g
Special properties The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Special properties for switching inductive and capacitive loads
Stripping length 8 mm
Switching current max. 0.15 A (for 250 V DC)
Switching frequency max. 0.1 Hz (with load)
Switching power max. 750 VA (see to derating)
Switching voltage max. 250 V DC
Switching voltage max. 253 V AC
Test voltage 1 kV, 50 Hz, 1 min
Test voltage 1 kV, 50 Hz, 1 min
Test voltage 4 kV, 50 Hz, 1 min
Type modular
Typical release time typ. 6 ms
Typical response time typ. 5 ms
UNSPSC 21.0 32151600
Weight per piece (excluding packing) 138 g
Weight per piece (including packing) 214.3 g
Width 48.8 mm