カテゴリを見る
Siemens 6ES7422-1BL00-0AA0 デジタル出力モジュール
説明
Siemens 6ES7422-1BL00-0AA0 デジタル出力モジュール。
仕様
| Brand | Siemens |
|---|---|
| Model | 6ES7422-1BL00-0AA0 |
| Order Number | 6ES7422-1BL00-0AA0 |
| Digital outputs | 32xDC24V/0.5A |
| Depth | 210 mm |
| Width | 25 mm |
| Height | 290 mm |
| Weight, approx | 600 g |
| Power loss, typ | 4 W |
| Load voltage rated value | 24 V |
| Supply voltage type | DC |
| Diagnostics function | No |
| Isolation tested with | 500 V AC/707 V DC, type test |
| Short-circuit protection | Yes; Clocked electronically |
| Cable length shielded, max | 1 000 m |
| Controlling a digital input | Yes; possible |
| Number of digital outputs | 32 |
| Cable length unshielded, max | 600 m |
| Input current from backplane bus 5 V DC, max | 200 mA |
| Load resistance range lower limit | 48 Ω |
| Load resistance range upper limit | 4 kΩ |
| Output voltage for signal "1", min | L+ (-0.3) V |
| Output current for signal "1", rated value | 0.5 A |
| Input current from load voltage L+ (without load), max | 30 mA |
| Load voltage permissible range lower limit | 20.4 V |
| Load voltage permissible range upper limit | 28.8 V |
| Switching capacity on lamp load, max | 5 W |
| Switching frequency with inductive load, max | 0.5 Hz |
| Switching frequency on lamp load, max | 10 Hz |
| Switching frequency with resistive load, max | 100 Hz |
| Output current for signal "0", residual current, max | 0.3 mA |
| Short-circuit response threshold, typ | 0.7 to 1.5 A |
| Limitation of inductive shutdown voltage to | -27 V |
| Potential separation digital outputs between the channels | No |
| Switching frequency with inductive load (acc. to IEC 60947-5-1, DC13), max | 2 Hz; 2 Hz at 0.3 A; 0.5 Hz at 0.5 A |
| Output delay with resistive load, "0" to "1", max | 1 ms |
| Output delay with resistive load, "1" to "0", max | 1 ms |
| Output current for signal "1", permissible range, max | 0.6 A |
| Output current for signal "1", permissible range, min | 5 mA |
| Parallel switching of two outputs for uprating | Yes; possible (only outputs of the same group) |
| Parallel switching of two outputs for redundant control of a load | Yes; possible (only outputs of the same group) |
| Potential separation between the channels and backplane bus | Yes |
| Total current of the outputs (per group), all mounting positions up to 40 °C, max | 4 A |
| Total current of the outputs (per group), all mounting positions up to 60 °C, max | 2 A; 8 adjacent outputs each |
| Potential separation between the channels, in groups of | 32 |