カテゴリを見る
Keyence LK-G3001 レーザー変位コントローラ - 中古
説明
中古のKeyence LK-G3001レーザー変位コントローラ。装置から取り外された品で、目立つ使用感があります。
仕様
| Brand | Keyence |
|---|---|
| Model | LK-G3001 |
| RS-232C interface | Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable) |
| Power voltage | 24 VDC ±10 %, Ripple (P-P) ≤10 % |
| Display range | ±9,999.99 mm to ±9,999.99 µm (Selectable from six levels) |
| USB interface | In conformity with USB Revision 2.0 Full speed (USB1.1 compatible) |
| Weight | Approx. 370 g |
| Ambient temperature | 0 to +50 °C (32 to 122 °F) |
| Relative humidity | 35 to 85 % RH (No condensation) |
| Alarm output | For OUT1, NPN open-collector output (N.C.) |
| Alarm output | For OUT2, NPN open-collector output (N.C.) |
| Analog current output | 4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω |
| Analog voltage output | ±10 V x 2 outputs, output impedance: 100 Ω |
| Binary output | Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output |
| Binary selector output | Binary selector input |
| Comparator output | For OUT1, NPN open-collector output |
| Comparator output | For OUT2, NPN open-collector output |
| Current consumption | ≤500 mA with 1 head/≤600 mA with 2 heads |
| Head compatibility | All LK-G sensor heads are compatible |
| Laser remote interlock input | Non-voltage input |
| Laser-Off input | For Head A/Head B, non-voltage input |
| Major functions | 2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc. |
| Minimum display unit | 0.01 µm |
| Number of connectable sensors | Maximum of 2 units |
| Program switching input | Non-voltage input x 3 inputs |
| Refresh rate | 10 times/sec |
| Reset input | Auto-zero input |
| Reset input | Auto-zero input |
| Strobe output | NPN open-collector output |
| Timing input | For OUT1, non-voltage input |
| Timing input | For OUT2, non-voltage input |
| Type | Separate monitor model |