Parcourir les categories
Phoenix Contact TRIO-PS-2G/1AC/24DC/20 alimentation électrique
Description
Phoenix Contact TRIO-PS-2G/1AC/24DC/20 fait partie de la gamme TRIO POWER en tant que alimentation électrique. Il se monte sur rail DIN et présente un indice de protection IP20.
Specifications
| Brand | Phoenix Contact |
|---|---|
| Model | TRIO-PS-2G/1AC/24DC/20 |
| Order Number | 2903151 |
| HS Code | 850440 |
| Voltage | 10 V (Test Level 3) |
| AC frequency range | 50 Hz ... 60 Hz ±10 % |
| Continuous load current | 100 mA |
| Inrush current | ≤ 20 A (typical) |
| Nominal output voltage | 24 V DC ±1 % |
| Power factor (UMax) | > 0.9 (230 V AC) |
| Power factor (UMin) | > 0.9 (120 V AC) |
| Power loss nominal load max. | < 44.8 W (120 V AC) |
| Power loss nominal load max. | < 36.8 W (230 V AC) |
| Shut-down voltage | < 77 V DC |
| Standard – Safety extra-low voltage | IEC 62368-1 (SELV) und EN 60204-1 (PELV) |
| Switch-on voltage | ≥ 87 V DC |
| Typical national grid voltage | 120 V AC |
| Voltage type of supply voltage | AC |
| Frequency range | Class A, B |
| Input voltage range | 100 V AC ... 240 V AC -15 % ... +10 % |
| Nominal input voltage range | 100 V AC ... 240 V AC |
| Degree of protection | IP20 |
| Recommended breaker for input protection | 10 A ... 16 A (Characteristics B, C, D, K) |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| Vibration (operation) | 15 Hz ... 150 Hz, 4g, 90 min. |
| EMC requirements for noise emission | EN 61000-6-3 |
| EMC requirements for noise emission | EN 61000-6-4 |
| EMC requirements for noise immunity | EN 61000-6-1 |
| EMC requirements for noise immunity | EN 61000-6-2 |
| REACH candidate substance (CAS No.) | Diboron trioxide (CAS: 1303-86-2) |
| REACH candidate substance (CAS No.) | Lead monoxide (lead oxide) (CAS: 1317-36-8) |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Shipbuilding approval | DNV GL |
| 13/14 | U OUT > 0.9 x U N (U N = 24 V DC) |
| Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
| Ambient temperature (start-up type tested) | -40 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Climatic class | 3K3 (in acc. with EN 60721) |
| CO2e kg | 37.31 kg CO2e |
| Color | green |
| Comments | Criterion A |
| Comments | Criterion B |
| Conductor cross-section AWG max. | 12 |
| Conductor cross-section AWG max. | 8 |
| Conductor cross-section AWG max. | 16 |
| Conductor cross-section AWG min. | 24 |
| Conductor cross-section flexible max. | 2.5 mm² |
| Conductor cross-section flexible max. | 6 mm² |
| Conductor cross-section flexible max. | 1.5 mm² |
| Conductor cross-section flexible min. | 0.2 mm² |
| Conductor cross-section, rigid max. | 4 mm² |
| Conductor cross-section, rigid max. | 10 mm² |
| Conductor cross-section, rigid max. | 1.5 mm² |
| Conductor cross-section, rigid min. | 0.2 mm² |
| Connection in parallel | yes, for redundancy and increased capacity |
| Connection in series | yes |
| Connection method | Push-in connection |
| Contact discharge | 6 kV (Test Level 4) |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| Control deviation | < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) |
| Control deviation | < 0.1 % (change in input voltage ±10 %) |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Current consumption | 5.6 A (100 V AC) |
| Current consumption | 4.3 A (120 V AC) |
| Current consumption | 2.4 A (230 V AC) |
| Current consumption | 2.4 A (240 V AC) |
| Current consumption | 4.9 A (110 V DC) |
| Current consumption | 2.1 A (250 V DC) |
| DC OK | U OUT > 0.9 x U N (U N = 24 V DC) |
| Default | closed |
| Degree of pollution | 2 |
| Depth | 160 mm |
| Derating | > 60 °C ... 70 °C (2.5 %/K) |
| Digital | 30 V AC 30 V DC 100 mA |
| Discharge current to PE | < 3.5 mA |
| Discharge in air | 8 kV (Test Level 4) |
| Dynamic Boost (I Dyn.Boost ) | 30 A (5 s) |
| ECLASS-13.0 | 27040701 |
| ECLASS-15.0 | 27040701 |
| Efficiency | typ. 91.4 % (120 V AC) |
| Efficiency | typ. 92.9 % (230 V AC) |
| Electric strength, max. | ≤ 300 V AC 15 s |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Emitted radio interference in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Environment friendly use period (EFUP) | EFUP-25 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC002540 |
| Exemption | 7(a), 7(c)-I |
| Extended input voltage range in operation | > 99 V DC |
| Feedback voltage resistance | ≤ 35 V DC |
| Frequency range | 0 kHz ... 2 kHz |
| Frequency range | 80 MHz ... 1 GHz |
| Frequency range | 1 GHz ... 2 GHz |
| Frequency range | 2 GHz ... 3 GHz |
| Frequency range | 0.15 MHz ... 80 MHz |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 130 mm |
| Hood version | Polycarbonate |
| Housing material | Metal |
| Input | 4 kV (Test Level 4 - asymmetrical) |
| Input | 3 kV (Test Level 3 - symmetrical) |
| Input | 6 kV (Test Level 4 - asymmetrical) |
| Input fuse | 10 A (internal (device protection)) |
| Input voltage range | 110 V DC ... 250 V DC ±10 % |
| Input/Output | asymmetrical |
| Inrush current integral (I 2 t) | < 0.9 A 2 s |
| Inrush current limitation | typ. 20 A (after 1 ms) |
| Installation distance right/left | 0 mm / 0 mm |
| Installation distance top/bottom | 50 mm / 50 mm |
| Insulation voltage input/output | 3 kV AC (type test) |
| Insulation voltage input/output | 1.5 kV AC (routine test) |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Mains buffering time | typ. 10 ms (120 V AC) |
| Mains buffering time | typ. 15 ms (230 V AC) |
| Mains buffering time | > 15 ms (230 V AC) |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Maximum altitude | ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) |
| Maximum no-load power dissipation | < 2.9 W (120 V AC) |
| Maximum no-load power dissipation | < 2.8 W (230 V AC) |
| Minimum order quantity | 1 pc |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
| Mounting type | DIN rail mounting |
| MTBF (IEC 61709, SN 29500) | > 1800000 h (25 °C) |
| MTBF (IEC 61709, SN 29500) | > 1000000 h (40 °C) |
| MTBF (IEC 61709, SN 29500) | > 480000 h (60 °C) |
| Network type | Star network |
| No-load proof | yes |
| Nominal input voltage range | 110 V DC ... 250 V DC |
| Nominal output current (I N ) | 20 A |
| Nominal power consumption | 534.7 VA |
| Number of phases | 1 |
| Output | 2 kV (Test Level 3 - asymmetrical) |
| Output | 1 kV (Test Level 2 - symmetrical) |
| Output | 2 kV (Test Level 1 - asymmetrical) |
| Output characteristic | U/I with dynamic load reserve |
| Output power | 480 W |
| Output power | 720 W (5 s) |
| Overvoltage category (EN 62368-1) | II (≤ 2000 m) |
| Packing unit | 1 pc |
| Product key | CMPO13 |
| Product type | Power supply |
| Protection against overvoltage at the output (OVP) | ≤ 30 V DC |
| Protection class | I (in closed control cabinet) |
| Protective circuit | Transient surge protection; Varistor |
| Radio interference voltage in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Rail applications | EN 50121-4 |
| Residual ripple | < 100 mV PP (with nominal values) |
| Rise time | 20 ms (U OUT (10 % ... 90 %)) |
| Scip | 02d6fdba-a12f-4e6b-9800-f398bba1e238 |
| Setting range of the output voltage (U Set ) | 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Short-circuit-proof | yes |
| Signal | 1 kV (Test Level 2 - asymmetrical) |
| Signalization designation | DC OK |
| SIL in accordance with IEC 61508 | 0 |
| Single conductor/terminal point, stranded, with ferrule, max. | 2.5 mm² |
| Single conductor/terminal point, stranded, with ferrule, max. | 6 mm² |
| Single conductor/terminal point, stranded, with ferrule, max. | 1.5 mm² |
| Single conductor/terminal point, stranded, with ferrule, min. | 0.2 mm² |
| Standard - Electrical safety | IEC 62368-1 (SELV) |
| Standard - Safe isolation | DIN VDE 0100-410 |
| Standard - Safety of transformers | EN 61558-2-16 (air clearances and creepage distances only) |
| Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
| Standards/regulations | EN 55016 |
| Standards/regulations | EN 61000-6-3 (Class B) |
| Standards/regulations | EN 55011 (EN 55022) |
| Standards/regulations | EN 61000-4-2 |
| Standards/regulations | EN 61000-4-3 |
| Standards/regulations | EN 61000-4-4 |
| Standards/regulations | EN 61000-4-5 |
| Standards/regulations | EN 61000-4-6 |
| Standards/regulations | EN 61000-6-3 |
| Status display | LED |
| Stripping length | 10 mm |
| Stripping length | 15 mm |
| Stripping length | 8 mm |
| terminal blocks) | V0 |
| Test field strength | 10 V/m (Test Level 3) |
| Type of housing | Aluminum (AlMg3) |
| Types of signaling | LED |
| Types of signaling | Floating signal contact |
| Typical national grid voltage | 230 V AC |
| Typical response time | < 1 s |
| UL approvals | UL Listed UL 508 |
| UL approvals | UL/C-UL Recognized UL 60950-1 |
| UL approvals | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
| UNSPSC 21.0 | 39121000 |
| Voltage type of supply voltage | DC |
| Weight per piece (excluding packing) | 1,321.8 g |
| Weight per piece (including packing) | 1,539.1 g |
| Width | 68 mm |
| With protective coating | no |