Explorar categorias
Phoenix Contact QUINT4-PS/24DC/24DC/20/PT convertidor CC/CC
Descripcion
Phoenix Contact QUINT4-PS/24DC/24DC/20/PT forma parte de la gama QUINT POWER como convertidor CC/CC. Ofrece una salida nominal de 24 V DC. El producto se monta en carril DIN y tiene protección IP20.
Especificaciones
| Brand | Phoenix Contact |
|---|---|
| Model | QUINT4-PS/24DC/24DC/20/PT |
| Order Number | 2910121 |
| HS Code | 850440 |
| Voltage | 10 V (Test Level 3) |
| Frequency | 16.7 Hz |
| Current | 10 A |
| Inrush current | typ. 2.7 A |
| Nominal output voltage | 24 V DC |
| Power dissipation SLEEP MODE | < 2 W |
| Power loss nominal load max. | < 26.6 W |
| Switching frequency | 190.00 kHz ... 220.00 kHz (Auxiliary converter stage) |
| Frequency range | 80 MHz ... 1 GHz |
| Input voltage range | 24 V DC -25 % ... +40 % |
| Nominal input voltage range | 24 V DC -25 % ... +40 % |
| Degree of protection | IP20 |
| Recommended breaker for input protection | 50 A (Characteristic B, C or comparable) |
| Vibration (operation) | 5 Hz ... 100 Hz resonance search 2.3g, 90 min, resonance frequency 2.3g, 90 min |
| EMC requirements for noise emission | EN 61000-6-3 |
| EMC requirements for noise emission | EN 61000-6-4 |
| EMC requirements for noise immunity | EN 61000-6-1 |
| EMC requirements for noise immunity | EN 61000-6-2 |
| EMC requirements, power plant | IEC 61850-3 |
| EMC requirements, power plant | EN 61000-6-5 |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Additional text | 24 V DC |
| Additional text | Bridge and deck area |
| Additional text | 60 s |
| Additional text | 3 s |
| Additional text | DC, 60 s |
| Additional text | Test Level 2 |
| Alternating component | 15 % (U N ) |
| Alternating component | 14 % (U N ) |
| Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
| Ambient temperature (start-up type tested) | -40 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Analog | 4 mA ... 20 mA ±5 % (Load ≤400 Ω) |
| AWG (recommended) | 20 ... 6 |
| AWG (recommended) | 24 ... 10 |
| AWG (recommended) | 24 ... 16 |
| Climatic class | 3K22 (in accordance with EN 60721-3-3) |
| CO2e kg | 30.597 kg CO2e |
| Comments | Criterion A |
| Comments | Criterion B |
| Connection in parallel | yes, for redundancy and increased capacity |
| Connection in series | yes |
| Connection labeling | 3.3 + |
| Connection labeling | 3.5 + |
| Connection labeling | 3.6 + |
| Connection labeling | 3.1, 3.2 |
| Connection labeling | 3.4 + |
| Connection method | Push-in connection |
| Contact discharge | 8 kV (Test Level 4) |
| Control deviation dynamic | < 3 % (change in load, static 10 % ... 90 %) |
| Control deviation Input voltage change | < 3 % (change in load, static 10 % ... 90 %) |
| Control deviation static | < 3 % (change in load, static 10 % ... 90 %) |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Criterion C | Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
| Current | 20 A |
| Current consumption | 27 A (24 V DC) |
| Default | Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd) |
| Default | U IN input voltage OK |
| Default | Output power |
| Default | Output voltage |
| Degree of pollution | 2 |
| Depth | 125 mm |
| Depth | 73 mm |
| Digital | 0 V DC |
| Digital | 24 V DC |
| Digital | 20 mA |
| Digital | 1 A |
| Digital | 30 V AC |
| Digital | 0.5 A |
| Discharge in air | 15 kV (Test Level 4) |
| Dnv | Class B |
| Dynamic Boost (I Dyn.Boost ) | 30 A (5 s) |
| ECLASS-13.0 | 27040701 |
| ECLASS-15.0 | 27040701 |
| Efficiency | typ. 94.7 % (24 V DC) |
| Electric strength, max. | 35 V DC (60 s) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Environment friendly use period (EFUP) | EFUP-25 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC002540 |
| Exemption | 6(c), 7(a), 7(c)-I |
| Feedback voltage resistance | ≤ 35 V DC |
| Flexible | 0.75 mm² ... 16 mm² |
| flexible | 0.2 mm² ... 6 mm² |
| flexible | 0.2 mm² ... 1.5 mm² |
| flexible with ferrule with plastic sleeve | 0.75 mm² ... 16 mm² |
| flexible with ferrule with plastic sleeve | 0.2 mm² ... 4 mm² |
| flexible with ferrule with plastic sleeve | 0.2 mm² ... 0.75 mm² |
| flexible with ferrule without plastic sleeve | 0.75 mm² ... 16 mm² |
| flexible with ferrule without plastic sleeve | 0.2 mm² ... 4 mm² |
| flexible with ferrule without plastic sleeve | 0.2 mm² ... 1.5 mm² |
| Frequency | 50 Hz |
| Frequency | 60 Hz |
| Frequency | 0 Hz |
| Frequency | 100 Hz |
| Frequency | 150 Hz |
| Frequency | 300 Hz |
| Frequency range | 1 GHz ... 6 GHz |
| Frequency range | 0.15 MHz ... 80 MHz |
| Frequency range | 50 Hz ... 60 Hz |
| Fulfills EU RoHS substance requirements | Yes |
| Function | Output power ON/OFF (remote) |
| Function | Signal ground |
| Fuse protection (secondary side) | electronic |
| Fuse protection (secondary side) | thermal-magnetic |
| Fuse protection (secondary side) | thermal |
| Height | 130 mm |
| Hood version | Stainless steel X6Cr17 |
| Housing material | Metal |
| Identification | UL Listed UL 61010-1 |
| Identification | UL Listed UL 61010-2-201 |
| Identification | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) |
| Identification | CAN/CSA-C22.2 No. 61010-1-12 |
| Identification | CAN/CSA C22.2 No. 61010-2-201:18 |
| Identification | Type tested (type approved) |
| Identification | CB scheme (IEC 61010-1, IEC 61010-2-201) |
| Identification | DNV |
| Identification | ABS |
| Identification | BV |
| Identification | NK |
| Identification | LR |
| Input | 2 kV (Test Level 3 - asymmetrical) |
| Input | 1 kV (Test Level 3 - symmetrical) |
| Input, output (test level 1) | 1 MHz (Test Level 2 - symmetrical) |
| Input, output (test level 2) | 1 MHz (Test Level 2 - asymmetrical) |
| Input/output/signal | asymmetrical |
| Inrush current integral (I 2 t) | < 0.2 A 2 s |
| Inrush current limitation | 2.7 A (after 1 ms) |
| Installation distance right/left (active) | 15 mm / 15 mm |
| Installation distance right/left (passive) | 5 mm / 5 mm |
| Installation distance top/bottom (active) | 50 mm / 50 mm |
| Installation distance top/bottom (passive) | 50 mm / 50 mm |
| Insulation voltage input/output | 4 kV DC (type test) |
| Insulation voltage input/output | 2 kV DC (routine test) |
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| Magnetic circuit breaker tripping | A1...A16 / B2...B13 / C1...C6 / Z1...Z16 |
| Mains buffering time | typ. 16 ms (24 V DC) |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Maximum altitude | ≤ 5000 m (> 2000 m, observe derating) |
| Maximum no-load power dissipation | < 4 W |
| Minimum order quantity | 1 pc |
| Mounting type | DIN rail mounting |
| MTBF (IEC 61709, SN 29500) | > 1034000 h (25 °C) |
| MTBF (IEC 61709, SN 29500) | > 577000 h (40 °C) |
| MTBF (IEC 61709, SN 29500) | > 229000 h (60 °C) |
| No-load proof | yes |
| Nominal output current (I N ) | 20 A |
| Nominal power consumption | 507 VA |
| Number of phases | 1.00 |
| Output | 2 kV (Test Level 3 - asymmetrical) |
| Output | 1 kV (Test Level 3 - symmetrical) |
| Output characteristic | U/I Advanced |
| Output characteristic | Smart HICCUP |
| Output characteristic | FUSE MODE |
| Output power (P Dyn. Boost ) | 720 W (5 s) |
| Output power (P N ) | 480 W |
| Output power (P Stat. Boost ) | 600 W |
| Overvoltage category (EN 61010-1) | II (≤ 5000 m) |
| Overvoltage category (EN 62477-1) | III (≤ 5000 m) |
| Packing unit | 1 pc |
| Position | 1.x |
| Position | 2.x |
| Position | 3.x |
| Product key | CMDI43 |
| Product type | DC/DC converters |
| Protection against overvoltage at the output (OVP) | ≤ 32 V DC |
| Protection class | Special with SELV input and output |
| Reference potential | to OUT1, OUT2, REM |
| Residual ripple | < 50 mV PP |
| Rigid | 1.5 mm² ... 16 mm² |
| rigid | 0.2 mm² ... 6 mm² |
| rigid | 0.2 mm² ... 1.5 mm² |
| Rise time | < 100 ms (U OUT (10 % ... 90 %)) |
| Scip | 4bdb74f4-6fe2-4deb-8723-f3657ea880ee |
| Selective Fuse Breaking (I SFB ) | 120 A (15 ms) |
| Setting range of the output voltage (U Set ) | 24 V DC ... 29.5 V DC (> 24 V DC, constant capacity) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Short-circuit-proof | yes |
| Side element version | Aluminum |
| Signal | 2 kV (Test Level 4 - asymmetrical) |
| Signal | 1 kV (Test Level 2 - asymmetrical) |
| Signal option | Output voltage |
| Signal option | Output current |
| Signal option | Output power |
| Signal option | Operating hours |
| Signal option | Early warning of high temperatures |
| Signal option | OVP voltage limitation active |
| Signal option | U IN input voltage OK |
| Signal threshold | > 100 % (LED lights up yellow, output power > 480 W) |
| Signal threshold | > 75 % (LED lights up green, output power > 360 W) |
| Signal threshold | > 50 % (LED lights up green, output power > 240 W) |
| Signal threshold | > 0.9 x U Set (LED lights up green) |
| Signal threshold | < 0.9 x U Set (LED flashes green) |
| Signal threshold | > 0.8 x U InNom (LED off) |
| Signal threshold | < 0.8 x U InNom (LED lights up yellow) |
| Signals (test level 1) | 1 MHz (Test Level 2 - symmetrical) |
| Signals (test level 2) | 1 MHz (Test Level 2 - asymmetrical) |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Standard designation | Electrical safety (of control and regulation devices) |
| Standard designation | Protective extra-low voltage |
| Standard designation | Mains variation/undervoltage |
| Standard designation | Railway applications |
| Standards/regulations | EN 55016 |
| Standards/regulations | EN 61000-6-3 (Class B) |
| Standards/regulations | Additional basic standard EN 61000-6-5 (immunity in switching devices), IEC/EN 61850-3 (power supply) |
| Standards/regulations | EN 61000-4-2 |
| Standards/regulations | EN 61000-4-3 |
| Standards/regulations | EN 61000-4-4 |
| Standards/regulations | EN 61000-4-5 |
| Standards/regulations | EN 61000-4-6 |
| Standards/regulations | EN 61000-4-8 |
| Standards/regulations | EN 61000-4-29 |
| Standards/regulations | EN 61000-4-9 |
| Standards/regulations | EN 61000-4-16 |
| Standards/regulations | EN 61000-4-17 |
| Standards/regulations | EN 61000-4-18 |
| Standards/regulations | EN 61000-4-10 |
| Standards/specifications | IEC 61010-1 |
| Standards/specifications | EN 61010-1 (SELV) |
| Standards/specifications | IEC 61010-2-201 (PELV) |
| Standards/specifications | EN 61000-4-29 |
| Standards/specifications | EN 50121-3-2 |
| Standards/specifications | IEC 62236-3-2 |
| Static Boost (I Stat.Boost ) | 25 A |
| Stripping length | 18 mm |
| Stripping length | 10 mm |
| Stripping length | 8 mm |
| Switch contact (floating) | floating |
| Switch-on time | < 1 s |
| Switching frequency | 67.00 kHz ... 135.00 kHz (Main converter stage) |
| Temperature | 40 °C |
| Temperature | 30 °C |
| Temperature code | T4 (-25 ... +70 °C; > 60 °C, Derating: 2,5 %/K) |
| terminal blocks) | V0 |
| Test field strength | 20 V/m (Test Level 3) |
| Test field strength | 10 V/m (Test Level 3) |
| Test field strength | 100 A/m |
| Test field strength | 1 kA/m |
| Test field strength | 300 A/m |
| Test field strength | 1000 A/m |
| Test level 1 | 15 Hz 150 Hz (Test Level 3) |
| Test level 1 | 100 kHz |
| Test level 2 | 150 Hz 1.5 kHz (Test Level 3) |
| Test level 2 | 1 MHz |
| Test level 3 | 1.5 kHz 15 kHz (Test Level 3) |
| Test level 4 | 15 kHz 150 kHz (Test Level 3) |
| Test level 5 | 16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3) |
| Test level 6 | 0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3) |
| Time | 413707 h |
| Time | 139340 h |
| Time | 278680 h |
| Time | 100 ms |
| Time | 50 ms |
| Types of signaling | LED |
| Types of signaling | Floating signal contact |
| Types of signaling | Active signal output Out1 (digital, configurable) |
| Types of signaling | Active signal output Out2 (analog, configurable) |
| Types of signaling | Remote contact |
| Types of signaling | Signal ground SGnd |
| Typical response time | 300 ms (from SLEEP MODE) |
| UNSPSC 21.0 | 39121000 |
| Voltage | 24 V DC |
| Voltage | 10 V 1 V |
| Voltage | 1 V |
| Voltage | 1 V 10 V |
| Voltage | 10 V |
| Voltage | 10 V (Permanent) |
| Voltage | 100 V (1 s) |
| Voltage | 0.5 kV |
| Voltage | 1 kV |
| Voltage dip | 70 % |
| Voltage dip | 40 % |
| Voltage dip | 0 % |
| Weight per piece (excluding packing) | 1,200 g |
| Weight per piece (including packing) | 1,571 g |
| Wide-range input | no |
| Width | 70 mm |
| Width | 122 mm |
| With protective coating | no |