Saltar al contenido

Phoenix Contact AXL SE RS232 módulo de comunicación

Phoenix Contact AXL SE RS232 módulo de comunicación

Solicitar cotizacion

Cantidad, estado y destino.

Solicitar cotizacion

Descripcion

Phoenix Contact AXL SE RS232 forma parte de la gama Axioline Smart Elements como módulo de comunicación. El producto se inserta en una ranura Smart Element y tiene protección IP20.

Especificaciones

Brand Phoenix Contact
Model AXL SE RS232
Order Number 1181787
Protocol Transparent
Supply voltage using card edge connectors
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Transmission speed 100 bps ... 230400 bps (can be parameterized)
Degree of protection IP20
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 5g
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Color (Housing) gray (RAL 7042)
Conductor cross-section AWG 24 ... 16
Conductor cross-section, flexible 0.25 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross-section, rigid 0.25 mm² ... 1.5 mm²
Connection method Card edge connector
Connection method Push-in connection
Connection name I/O
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 10g
Current consumption min. 6 mA (without connected peripherals)
Current draw max. 9 mA
Current draw typ. 7 mA
Data bits 7 or 8
Depth 62 mm
ECLASS-13.0 27242608
ECLASS-15.0 27242608
Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
ETIM 10.0 EC001604
Exemption 7(a), 7(c)-I
Fulfills EU RoHS substance requirements Yes
Height 62.2 mm
Input address area 20 Byte
Input buffer 4 kByte
Maximum power dissipation for nominal condition 0.3 W
Minimum order quantity 1 pc
Mounting position See the system in which the Smart Element is used.
Mounting type Plug-in mounting (Smart Element slot)
Number of interfaces 1
Output address area 20 Byte
Output buffer 1 kByte
Overvoltage category II (IEC 60664-1, EN 60664-1)
Packing unit 1 pc
Parity Even, odd or no parity
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Process data channel 160 bit
Product key DRIB51
Product type I/O component
Protection See the system in which the Smart Element is used.
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Protective circuit Surge protection; See the system in which the Smart Element is used.
Protective circuit Reverse polarity protection; Polarity protection diode
Required configuration data 7 Byte
Required parameter data 11 Byte
Shock in accordance with EN 60068-2-27/IEC 60068-2-27 30g
Special properties The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Special properties Process data width: 20 bytes
Special properties Transparent protocol
Start time until ready to operate < 500 ms
Stop bits 1 or 2
Stripping length 8 mm
Supply voltage 24 V DC (using card edge connectors)
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Transmission physics Copper
Type modular
UNSPSC 21.0 32151600
Weight per piece (excluding packing) 34.97 g
Weight per piece (including packing) 34.8 g
Width 14.9 mm