Zum Inhalt springen

Phoenix Contact AXL SE RS232 Kommunikationsmodul

Phoenix Contact AXL SE RS232 Kommunikationsmodul

Angebot anfragen

Menge, Zustand und Zielort angeben.

Angebot anfragen

Beschreibung

Phoenix Contact AXL SE RS232 gehört als Kommunikationsmodul zur Reihe Axioline Smart Elements. Es wird in einen Smart-Element-Steckplatz eingesetzt und hat die Schutzart IP20.

Spezifikationen

Brand Phoenix Contact
Model AXL SE RS232
Order Number 1181787
Protocol Transparent
Supply voltage using card edge connectors
Supply voltage range 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Transmission speed 100 bps ... 230400 bps (can be parameterized)
Degree of protection IP20
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 5g
REACH candidate substance (CAS No.) Lead (CAS: 7439-92-1)
Ambient temperature (operation) -25 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Color (Housing) gray (RAL 7042)
Conductor cross-section AWG 24 ... 16
Conductor cross-section, flexible 0.25 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross-section, flexible, with ferrule, without plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross-section, rigid 0.25 mm² ... 1.5 mm²
Connection method Card edge connector
Connection method Push-in connection
Connection name I/O
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 10g
Current consumption min. 6 mA (without connected peripherals)
Current draw max. 9 mA
Current draw typ. 7 mA
Data bits 7 or 8
Depth 62 mm
ECLASS-13.0 27242608
ECLASS-15.0 27242608
Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required.
ETIM 10.0 EC001604
Exemption 7(a), 7(c)-I
Fulfills EU RoHS substance requirements Yes
Height 62.2 mm
Input address area 20 Byte
Input buffer 4 kByte
Maximum power dissipation for nominal condition 0.3 W
Minimum order quantity 1 pc
Mounting position See the system in which the Smart Element is used.
Mounting type Plug-in mounting (Smart Element slot)
Number of interfaces 1
Output address area 20 Byte
Output buffer 1 kByte
Overvoltage category II (IEC 60664-1, EN 60664-1)
Packing unit 1 pc
Parity Even, odd or no parity
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Pollution degree 2 (IEC 60664-1, EN 60664-1)
Process data channel 160 bit
Product key DRIB51
Product type I/O component
Protection See the system in which the Smart Element is used.
Protection class III (IEC 61140, EN 61140, VDE 0140-1)
Protective circuit Surge protection; See the system in which the Smart Element is used.
Protective circuit Reverse polarity protection; Polarity protection diode
Required configuration data 7 Byte
Required parameter data 11 Byte
Shock in accordance with EN 60068-2-27/IEC 60068-2-27 30g
Special properties The product is being prepared for compliance with the Cyber Resilience Act (CRA)
Special properties Process data width: 20 bytes
Special properties Transparent protocol
Start time until ready to operate < 500 ms
Stop bits 1 or 2
Stripping length 8 mm
Supply voltage 24 V DC (using card edge connectors)
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Test voltage 500 V AC, 50 Hz, 1 min
Transmission physics Copper
Type modular
UNSPSC 21.0 32151600
Weight per piece (excluding packing) 34.97 g
Weight per piece (including packing) 34.8 g
Width 14.9 mm