Browse categories
WAGO 787-1712 - Used
Description
Used WAGO 787-1712 power supply. Input: AC 100 - 240 V. Output: DC 24 V / 2 A; DC 24 V / 2.5 A (Uin ≥ AC 110 V).
Specifications
| Brand | WAGO |
|---|---|
| MPN | 787-1712 |
| HS Code | 850440 |
| Origin | China |
| Connection type | Input/output |
| Input voltage | AC 100 - 240 V |
| Input frequency | 50 - 60 Hz |
| Input current | 1.8 A |
| Inrush current | ≤ 18 A |
| Power (Max.) | 60 W |
| Power factor correction (PFC) | Passive |
| Power loss Pl | ≤ 12 W (230 VAC; 24 VDC; 2.5 A) |
| Input voltage range | 1 x 90 … 264 VAC; 125 … 375 VDC |
| Nominal mains frequency range | 47 … 63 Hz; 0 Hz |
| Output voltage range | 22 … 26 VDC (adjustable) |
| Weight | 300 g |
| Relative humidity | 10 … 95 % (no condensation permissible) |
| Ambient temperature (operation) | -20 … +60 °C |
| Ambient temperature (storage) | -25 … +75 °C |
| Backup fuse (recommended) | Circuit breaker: B6, B10 |
| Climatic category | 3K3 (per EN 60721) |
| Conformity marking | CE |
| Connection technology | CAGE CLAMP® |
| Default Setting | 24 VDC |
| Depth from upper-edge of DIN-rail | 99 mm / 3.898 inches |
| Derating | -4 %/K (> 45 °C) |
| Deviation | ≤ 1 % |
| Eccn | NO US CLASSIFICATION |
| eCl@ss 10.0 | 27-04-07-01 |
| eCl@ss 9.0 | 27-04-07-01 |
| Efficiency (typ.) | 88 % (230 VAC; 2.5 ADC) |
| ETIM 10.0 | EC002540 |
| ETIM 9.0 | EC002540 |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
| Fire load | 0.129 MJ |
| Height | 90 mm / 3.543 inches |
| Input current Ii | ≤ 0.6 A (230 VAC); ≤ 1.2 A (115 VAC) |
| Internal fuse | F 2 A / 250 VAC |
| Isolation voltage (pri.-PE) | 2.2 kVDC |
| Isolation voltage (pri.-sec.) | 4.242 kVDC |
| Isolation voltage (sec.-PE) | 0.7 kVDC |
| Mains failure hold-up time | ≥ 10 ms (230 VAC) |
| Mounting type | DIN-35 rail; Screw mount |
| Mtbf | > 300,000 h (per IEC 61709) |
| Nominal input voltage Ui nom | 1 x 100 … 240 VAC |
| Nominal output current Io nom | 2.5 A (24 VDC; 110 … 240 VAC); 2 A (24 VDC; 100 … 240 VAC) |
| Nominal output power | 60 W |
| Nominal output voltage Uo nom | 24 VDC (SELV) |
| Open-circuit-proof | Yes |
| Operation status indicator | Green LED (Uo) |
| Output | DC 24 V / 2 A; DC 24 V / 2.5 A (Uin ≥ AC 110 V) |
| Overload behavior | Constant power (in overload range: 1.05 … 1.4 x Io nom); Shutdown and automatic restart in the event of a short circuit |
| Overvoltage category | II |
| Parallel operation | Yes |
| Phases | 1 |
| Pollution degree | 2 |
| Pre-fuse (required) | An external DC fuse is required for the DC input voltage. |
| Protection class | I |
| Protection type | IP20; per EN 60529 |
| PU (SPU) | 1 pcs |
| Residual ripple | ≤ 200 mV (peak-to-peak) |
| Resistance to reverse feed | ≤ 30 VDC |
| RoHS Compliance Status | Compliant,No Exemption |
| SCIP notification number (Bulgaria) | 7d2334e6-553b-4c2b-a393-ffe26f33c4cc |
| SCIP notification number (Czech Republic) | 5e2d347c-a5a6-461e-b623-4c39a501d484 |
| Series operation | Yes, for 2 devices of the same type |
| Short-circuit-protected | Yes |
| Signaling | 1 x DC OK LED (green) |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
| Standards/specifications | EN 61204-3; EN 60335-1; EN 62368-1; UL 60950-1; UL 508; SEMI F47 |
| Strip length | 6 … 7 mm / 0.24 … 0.28 inches |
| Transient suppression (primary) | Varistor |
| Unspsc | 39,121,004 |
| WAGO connector | WAGO 236 Series |
| Width | 40 mm / 1.575 inches |