Browse categories
Azbil HP300-S1 photoelectric sensor - Used
Description
Used Azbil HP300-S1 photoelectric sensor, removed from equipment, with cable. It has signs of use. Supply voltage: 12/24 VDC.
Specifications
| Brand | Azbil |
|---|---|
| Model | HP300-S1 |
| Origin | China |
| Power supply | 10 to 30Vdc (ripple 10% max.) |
| Response time | 500µs max. for both operation and recovery |
| supply voltage | 12/24 VDC |
| Weight | Approx. 55g (body with 2m cable only) |
| Operating temperature | –30 to +60ŇC (no freezing or condensing) °C |
| Storage temperature | –40 to +70ŇC(no freezing or condensing) °C |
| Circuit protection | Power ON malfunction prevention (approx. 8ms delay), wiring error protection |
| Ambient light immunity | Incandescent lamp: 10,000 lux max. Sunlight: 40,000 lux max. |
| Control output | Switching current: 100 mA max. (resistive load). Output dielectric strength: 30 V.Voltage drop: 3 V max. (at 100 mA switching current). Short circuit protection. |
| Current consumption | 11 mA |
| Detection type | Short-distance diffuse-scan |
| Emitter LED | Infrared LED |
| Indicator | Output indicator: orange at control output ON. Stability indicator: green at stable light/dark status |
| Operating humidity | 30 to 85% RH (no freezing or condensing) |
| Operation mode | Light-ON / dark-ON selectable by switch |
| Output type | NPN open collector |
| Protective structure | IP67 (IEC) |
| Scanning distance | 200mm |
| Sensitivity adjustment method | 1-turn potentiometer |
| supply class | Class2 |
| Wiring type | Preleaded, cable length 2m |
Documents
hp300
Datasheet
Open