カテゴリを見る
Phoenix Contact PSR-SCP-24UC/ESAM4/8X1/1X2 2963912 安全リレー - 中古
説明
中古のPhoenix Contact PSR-SCP-24UC/ESAM4/8X1/1X2 安全リレー、部品番号2963912。このリレーは24 V AC/DC入力に対応し、許容範囲は-15%～+10%、出力接点は230 V AC、6 Aに対応しています。表示灯を備え、取り外しによる軽度の使用感があります。
仕様
| Brand | Phoenix Contact |
|---|---|
| Model | PSR-SCP-24UC/ESAM4/8X1/1X2 |
| Order Number | 29 63 91 2 |
| Input Voltage | 24 V AC/DC -15% +10% |
| Switching frequency | max. 0.5 Hz |
| Inrush current | typ. 3.5 A (with U S, Δt = 2 ms) |
| Limiting continuous current | 6 A (observe derating) |
| Power consumption at U S | typ. 2.4 W |
| Rated insulation voltage | 250 V |
| Sq. Total current | 144 A 2 (observe derating) |
| Switching voltage | min. 5 V AC/DC |
| Degree of protection | IP20 |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Application | Emergency stop |
| Application | Safety door |
| CO2e kg | 9.868 kg CO2e |
| Color (Housing) | yellow (RAL 1018) |
| Concurrence | ∞ |
| Conductor cross-section AWG | 24 ... 12 |
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section rigid | 0.2 mm² ... 2.5 mm² |
| Connection method | Screw connection |
| Contact material | AgSnO 2 |
| Contact switching type | 8 enabling current paths |
| Contact switching type | 1 signaling current path |
| Control | 1 and 2 channel |
| Current consumption | 50 mA (S10, S12) |
| Current consumption | -50 mA (S22) |
| Current consumption | 0 mA (S34) |
| Current consumption | 1 mA (S35) |
| Degree of pollution | 2 |
| Depth | 114.5 mm |
| Description of the input | safety-related |
| Description of the input | non-safety-related |
| Designation | A1/A2 |
| ECLASS-13.0 | 27371819 |
| ECLASS-15.0 | 27371819 |
| ECLASS-15.0 ASSET | 27250101 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001449 |
| Exemption | 7(a), 7(c)-I |
| Filter time | 2 ms (in the event of voltage dips at U s ) |
| Filter time | No brightness test pulses / high test pulses permitted. |
| Filter time | max. 1.5 ms (Test pulse width, low test pulses (S10, S12) ) |
| Filter time | Test pulse rate = 5 x test pulse width, low test pulses (S10, S12) |
| Filter time | No test pulses permitted |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 99 mm |
| Housing material | PA |
| Identification | CE-compliant |
| Input | 24 V AC/DC -15% +10% |
| Input current range "0" signal | 0 mA ... 2 mA (S10, S12) |
| Input voltage range "0" signal | 0 V DC ... 5 V DC (S10, S12) |
| Input voltage range "0" signal | S22 open |
| Input voltage range "1" signal | 20.4 V ... 26.4 V (S10, S12) |
| Input voltage range "1" signal | 0 V ... 0 V (S22) |
| Input voltage range "1" signal | 20.4 V ... 26.4 V |
| Inrush current | max. 150 mA (Δt = 1 ms, with U s /I x at S10) |
| Inrush current | max. 200 mA (Δt = 1 ms, with U s /I x at S12) |
| Inrush current | max. -180 mA (Δt = 1 ms, with U s /I x at S22) |
| Inrush current | < 10 mA |
| Inrush current | min. 10 mA AC/DC |
| Inrush current | max. 6 A |
| Inrush current | min. 10 mA |
| Limiting continuous current | 6 A |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible overall conductor resistance | 11 Ω |
| Max. permissible overall conductor resistance | 50 Ω |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Maximum power dissipation for nominal condition | 31.7 W (U S = 26.4 V, I L ² = 144 A², P Total max = 2.9 W + 28.8 W) |
| Mechanical service life | approx. 10 7 cycles |
| Mechanical service life | 10x 10 6 cycles |
| Min. degree of protection of inst. location | IP54 |
| Minimum order quantity | 1 pc |
| Mounting position | vertical or horizontal |
| Mounting type | DIN rail mounting |
| Nominal operating mode | 100% operating factor |
| Number of inputs | 3 |
| Number of inputs | 2 |
| Number of outputs | 8 |
| Number of outputs | 1 |
| Operating voltage display | 1 x LED (green) |
| Output description | 2 N/O contacts each in series, safety-related, floating |
| Output description | 2 N/C contacts parallel, non-safety-related, floating |
| Output fuse | 10 A gL/gG |
| Output fuse | 6 A gL/gG (Low demand) |
| Output fuse | 6 A gL/gG |
| Output fuse | 4 A gL/gG (Low demand) |
| output_voltage | 230 V AC |
| Overvoltage category | III |
| Packing unit | 1 pc |
| Performance level (PL) | e (3 A DC13; 3 A AC15; 8760 switching cycles/year) |
| Pluggable | yes |
| Product key | DNA114 |
| Product type | Safety relays |
| Protective circuit | Serial protection against polarity reversal; Suppressor diode |
| Protective circuit | Suppressor diode |
| Rated control circuit supply voltage U S | 24 V DC -15 % / +10 % |
| Rated control supply current I S | typ. 100 mA (at U S ) |
| Rated surge voltage/insulation | See data sheet, section “Insulation coordination”. |
| Recovery time | 500 ms (following demand of the safety function) |
| Recovery time | 250 ms (Availability time after activating the sensor circuit during manual start) |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Restart time | < 1 s (Boot time) |
| Safety Integrity Level (SIL) | 3 |
| Scip | 27dcdbac-c215-44b3-abe0-df73c0c23cb0 |
| Screw thread | M3 |
| Shock | 15g (contact interruptions < 100 s possible) |
| Sq. Total current | 36 A 2 |
| Start pulse length | min. 500 ms (manual start) |
| Status display | 2 x LED (green) |
| Stop category (EN 60204-1) | 0 |
| Stripping length | 7 mm |
| Switching capacity | 3 A (AC 15) |
| Switching capacity | 5 A (DC 13) |
| Switching capacity | 1.5 A (AC 15) |
| Switching power | min. 50 mW |
| Switching voltage | max. 250 V AC/DC |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Typ. starting time with U s | < 200 ms (with Us / when controlled via A1) |
| Typical release time | < 20 ms (At Us on demand via sensor circuit) |
| Typical release time | < 50 ms (At Us/on demand via A1) |
| Typical response time | < 140 ms (For U s manual, monitored start) |
| Typical response time | < 120 ms (For U s autostart) |
| UNSPSC 21.0 | 39122200 |
| Weight per piece (excluding packing) | 339.64 g |
| Weight per piece (including packing) | 370 g |
| Width | 45 mm |