コンテンツへスキップ

Keyence IV-G10 画像認識センサー - 中古

Keyence IV-G10 画像認識センサー - 中古

見積もりを依頼

数量、希望状態、配送先を入力してください。

見積もりを依頼

説明

中古のKeyence IV-G10画像認識センサー、設備から取り外し済み。

仕様

Brand Keyence
Model IV-G10
Power Voltage 24 VDC ±10 % (including ripple)
Weight Approx. 150 g
Ambient Temperature 0 to +50 °C (32 to 122 °F); no freezing
Relative Humidity 35 to 85 % RH (No condensation)
Analysis Information OFF/Statistics/Histograms is switchable
Current Consumption ≤0.8 A. ≤1.5 A when also using an expansion unit (IV-G15). (The output load is excluded.)
Ethernet Connector RJ-45 8pin connector
Ethernet Standard 100BASE-TX/10BASE-T
Image History Condition NG only/All is selectable
Image History Numbers When using a color type head: 100 images, when using a monochrome type head: 300 images
Indicators PWR/ERR, OUT, TRIG, STATUS, LINK/ACT
Input Functions IN1: External trigger, IN2 to IN6: Enable by assigning the optional functions; Assignable functions: Program switching, Clear error, External master image registration, Main unit/expansion unit simultaneous input
Input Type Non-voltage input/voltage input is switchable
Input Voltage Conditions For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit); For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
Inputs 6 inputs (IN1 to IN6)
Material Main unit case: Polycarbonate
Network Function FTP client, EtherNet/IP™, PROFINET
Other Functions HDR, HighGain, Color filters, Digital zoom (2x, 4x), Brightness correction, Tilt correction, White balance, Mask outline, Mask area, Test run, ToolAutoTune, Input monitor, Output test, Security settings, Simulator, Mutual interference prevention, Total judgment result output, Direct connection (2 units or more), Failing sensor list, Failure hold
Output Functions Enable by assigning the optional functions; Assignable functions: Total judgment result, RUN, BUSY, Error, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Main unit/expansion unit logical output
Output Rating NPN Maximum rating 26.4 V 50 mA (20 mA when linked to an expansion unit [IV-G15]), remaining voltage 1.5 V or lower
Output Rating PNP Maximum rating 26.4 V 50 mA (20 mA when linked to an expansion unit [IV-G15]), remaining voltage 2 V or lower
Output Type Open collector output NPN/PNP is switchable, N.O./N.C. is switchable
Outputs 8 outputs (OUT1 to OUT8)
Switch Settings (programs) 32 programs
Tools Number Detection tools: 16 tools, position adjustment tool: 1 tool
Tools Type Shape Detection, Color Area, Area, position adjustment
Type Main unit