Parcourir les categories
Module d’E/S WAGO 750-538 - sortie relais
Description
Le module d’E/S WAGO 750-538 fournit 2 sorties relais.
Specifications
| Brand | WAGO |
|---|---|
| MPN | 750-538 |
| Connection type | Inputs/outputs |
| Power consumption Pmax. | 0.8 W |
| Power loss Pl | 0.8 W |
| Signal type (voltage) | 100 VAC; 30 VDC |
| Weight | 49.1 g |
| Vibration resistance | 4g per IEC 60068-2-6 |
| CAS-No. | 1303-86-2; 1317-36-8; 7439-92-1 |
| EMC emission of interference | per EN 61000-6-3, marine applications |
| EMC immunity to interference | per EN 61000-6-2, marine applications |
| REACH Candidate List Substance | Diboron trioxide; Lead; Lead monoxide |
| Actuator connection | 2 x (3-wire) |
| Ambient temperature (operation) | 0 … +55 °C |
| Ambient temperature (storage) | -25 … +85 °C |
| Color | blue |
| Conformity marking | CE |
| Connectable conductor materials | Copper |
| Connection technology | 6 x CAGE CLAMP® |
| Current carrying capacity (power jumper contacts) | 1 A |
| Current consumption (system supply) | 26 mA |
| Current consumption, field supply (module with no external load) | 24 mA |
| Depth | 67.8 mm / 2.669 inches |
| Depth from upper-edge of DIN-rail | 60.6 mm / 2.386 inches |
| Drop-out time (max.) | 4 ms |
| Eccn | NO US CLASSIFICATION |
| eCl@ss 10.0 | 27-24-26-04 |
| eCl@ss 9.0 | 27-24-26-04 |
| Electrical switching operations (min.) (at max. resistive load) | 100 x 10³ switching operations |
| ETIM 10.0 | EC001599 |
| ETIM 9.0 | EC001599 |
| Ex standard | EN IEC 60079-0, -7, -11 |
| Exposure to pollutants | per IEC 60068-2-42 and IEC 60068-2-43 |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fire load | 0.886 MJ |
| Height | 100 mm / 3.937 inches |
| Housing material | Polycarbonate; polyamide 6.6 |
| Identification | ATEX: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc; II (1) D [Ex ia Da] IIIC; I (M1) [Ex ia Ma] I; IECEx/INMETRO: Ex ec [ia Ga] IIC T4 Gc; [Ex ia Da] IIIC; [Ex ia Ma] I; cULus (Zone classified): Cl I Zn 2 AEx nA [ia Ga] IIC T4 Gc; Cl I Zn 2 AEx nA [ia IIIC] IIC T4 Gc; Ex nA [ia Ga] IIC T4 Gc X; Ex nA [ia IIIC] IIC T4 Gc X; cULus (Devision classified): Class I, Div. 2, Group A B C D, T4 |
| Indicators | LED (A, E) green: Status relay 1, relay 2 |
| Intrinsically safe Ex i | Yes |
| Isolation | 300 VAC system/supply |
| Load type | Resistive, inductive, lamp load |
| Mechanical switching operations (min.) (at max. resistive load) | 100 x 10⁶ switching operations |
| Mounting position | Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom |
| Mounting type | DIN-35 rail |
| Number of digital outputs | 2 |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Operating altitude | 0 … 2000 m / 0 … 6562 ft |
| Output characteristic | potential-free |
| Output circuit design | 2 changeover contacts; Relay |
| Output data width (internal) max. | 2 Bit |
| Permissible H2S contaminant concentration at a relative humidity < 75 % | 10 ppm |
| Permissible SO2 contaminant concentration at a relative humidity < 75 % | 25 ppm |
| Pollution degree | 2 per IEC 61131-2 |
| Protection type | IP20 |
| PU (SPU) | 1 pcs |
| Pull-in time (max.) | 4 ms |
| Relative humidity (without condensation) | 95 % |
| RoHS Compliance Status | Compliant,With Exemption |
| Safety-relevant data (circuit) | Relay output: Ui = 30 VDC; Ii = 1 A; Pi = 30 W; Ui = 100 VAC; Ii = 0.5 A; Pi = 50 VA; Li = negligibly small; Ci = negligibly small. Both maximum switching current and voltage must comply with EN 60079-11. |
| SCIP notification number (Austria) | d5f097b7-abf8-45ad-b3d6-b946671af2f4 |
| SCIP notification number (Belgium) | bc938025-28c2-42df-b54b-e4afb7730e85 |
| SCIP notification number (Bulgaria) | 002bd186-d5e3-47b3-a7a0-0389c8b06f75 |
| SCIP notification number (Czech Republic) | 5a60556d-909a-4527-8f57-cb9a00d43af1 |
| SCIP notification number (Denmark) | 6022b4af-1510-49c7-a5c1-b9597d95f99e |
| SCIP notification number (Finland) | 8a5098d3-6519-4d07-827a-b7bbeb879faa |
| SCIP notification number (France) | 406fa678-d793-411e-a492-2067b6d1f6fd |
| SCIP notification number (Germany) | 3c9d315e-a017-4d5c-91f8-d6a6defebaf3 |
| SCIP notification number (Hungary) | 06717bb8-38dd-42c6-8d6a-45e1ce22fe4e |
| SCIP notification number (Italy) | e749c4cb-46c1-49e0-af72-1f7934257865 |
| SCIP notification number (Netherlands) | f9ba7bbb-cfc3-498a-b3b2-912cd79b6bcf |
| SCIP notification number (Poland) | 058fa26f-3bef-4e58-bcab-a083d9b032cf |
| SCIP notification number (Romania) | 72236ad5-6438-41d5-a481-598ef0fdf16d |
| SCIP notification number (Sweden) | 3a2c1934-049e-4915-848c-d5761f0faec8 |
| Shock resistance | 15g per IEC 60068-2-27 |
| Signal type | Digital |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
| Supply voltage (field) | 24 VDC; (Ex i power supply: Uo = max. 26.8 V); via power jumper contacts (supply via blade contact; distribution via spring contact) |
| Supply voltage (system) | 5 VDC; via data contacts |
| Switching current (max.) | 0.5 A |
| Switching current (min.) | 0.01 mA |
| Switching frequency (max.) | 0.3 Hz |
| Switching power | 50 VA / 30 W |
| Switching voltage (max.) | 100 VAC, 30 VDC |
| Switching voltage (min.) | 0.01 V |
| Total number of channels (module) | 2 |
| Unspsc | 32,101,517 |
| Width | 12 mm / 0.472 inches |