Parcourir les categories
Phoenix Contact PSR-UNI-L-2X2NO-2DO-24DC-SC relais de sécurité
Description
Phoenix Contact PSR-UNI-L-2X2NO-2DO-24DC-SC fait partie de la gamme PSRuni en tant que relais de sécurité. Il est spécifié pour les circuits d’arrêt d’urgence. Il se monte sur rail DIN et présente un indice de protection IP20.
Specifications
| Brand | Phoenix Contact |
|---|---|
| Model | PSR-UNI-L-2X2NO-2DO-24DC-SC |
| Order Number | 1487647 |
| Voltage | typ. (U S - 2,5 V) |
| Switching frequency | max. 0.1 Hz |
| Current | max. 100 mA |
| Inrush current | typ. 35 A (Δt = 25 µs at U s ) |
| Limiting continuous current | 6 A |
| Maximum inrush current | 500 mA (Δt = 100 ms at U s ) |
| Power consumption at U S | typ. 1.32 W |
| Rated insulation voltage | 250 V |
| Sq. Total current | 144 A 2 (K1 = 72 A², K2 = 72 A², observe derating) |
| Switching voltage | min. 10 V AC/DC |
| Limit frequency | min. 0 Hz |
| Degree of protection | IP20 |
| Short-circuit protection | Yes |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -25 °C ... 60 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Application | Emergency stop |
| Application | Safety door |
| Application | Light grid |
| Application | Magnetic switch |
| Application | Two-hand control |
| Application | Safety shut-off mats |
| Cable length | See inputs |
| CO2e kg | 16.915 kg CO2e |
| Color | yellow (RAL 1018) |
| Concurrence | ∞ (2-channel wiring), 5 s (non-equivalent wiring), 0.5 s (two-hand control) |
| Conductor cross-section AWG | 24 ... 12 |
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section rigid | 0.2 mm² ... 2.5 mm² |
| Connection method | Screw connection |
| Contact material | AgCuNi +0.2 µm ... 0.4 µm Au / AgSnO 2 +0.2 µm Au |
| Contact switching type | 4 enabling current paths |
| Control | 1 and 2 channel |
| Current consumption | 3.5 mA (typ. with U S ) |
| Current consumption | < 3.5 mA (typ. with U S ) |
| Degree of pollution | 2 |
| Depth | 111.7 mm |
| Description of the input | safety-related |
| Description of the input | IEC 61131-2 type 3 |
| Description of the input | non-safety-related |
| Designation | A1/A2 |
| Discharging circuit | no |
| ECLASS-13.0 | 27371819 |
| ECLASS-15.0 | 27371819 |
| ECLASS-15.0 ASSET | 27250101 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| Error indication | 1 x LED (red) |
| ETIM 10.0 | EC001449 |
| Exemption | 7(a), 7(c)-I |
| Filter time | 1 ms (logic) |
| Filter time | max. 3 ms (Test pulse width of low test pulses) |
| Filter time | min. 50 ms (Test pulse rate for low test pulse) |
| Filter time | < 1 ms (High test pulses at >100 ms test pulse rate possible) |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 112.7 mm |
| Housing material | PA |
| Input current range "0" signal | 0 mA ... 1.5 mA |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30 V DC |
| Inrush current | < 45 mA (typ. with U S, Δt |
| Inrush current | min. 3 mA |
| Inrush current | max. 6 A |
| Limit frequency | max. 0.1 Hz |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible overall conductor resistance | 150 Ω |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Maximum power dissipation for nominal condition | 9.15 W (At U S = 30 V, I L ² = 144 A², configured functions: mode 1 = 2, mode 2 = 2) |
| Mechanical service life | 10x 10 6 cycles |
| Min. degree of protection of inst. location | IP54 |
| Minimum order quantity | 1 pc |
| Mounting position | vertical or horizontal |
| Mounting type | DIN rail mounting |
| Nominal operating mode | 100% operating factor |
| Number of inputs | 4 |
| Number of inputs | 2 |
| Number of outputs | 4 (undelayed) |
| Number of outputs | 2 |
| Ohmic load | min. 192 Ω (max. 100 mA) |
| Operating voltage display | 1 x LED (green, yellow, red) |
| Output description | safety-related |
| Output description | 2 NO contacts each in series, without delay, floating |
| Output description | non-safety-related |
| Output fuse | 6 A gL/gG |
| Output fuse | 4 A gL/gG (for low-demand applications) |
| Overvoltage category | III (Between logic and enabling current paths) |
| Packing unit | 1 pc |
| Performance level (PL) | e |
| Pluggable | yes |
| Product key | DNA191 |
| Product type | Safety relays |
| Protective circuit | Serial protection against polarity reversal |
| Protective circuit | Suppressor diode |
| Protective circuit | Varistor |
| Protective circuit | Reverse polarity protection |
| Rated control circuit supply voltage U S | 24 V DC -20 % / +25 % |
| Rated control supply current I S | typ. 65 mA (When sensor circuit and start circuit are controlled internally) |
| Rated control supply current I S | typ. 45 mA (When sensor circuit and start circuit are controlled externally) |
| Rated surge voltage/insulation | See data sheet, section “Insulation coordination”. |
| Recovery time | 500 ms (following demand of the safety function) |
| Recovery time | > 100 ms (Availability time after activating the sensor circuit during manual start) |
| Recovery time | > 500 ms (Availability time after activating the sensor circuits during manual start in safety shut-off mat operation) |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Restart time | < 1 s (Boot time) |
| Safety Integrity Level (SIL) | 3 |
| Screw thread | M3 |
| Shock | 15g |
| Start pulse length | min. 500 ms (manual start) |
| Status display | 4 x LED (green, yellow, red) |
| Stop category (EN 60204-1) | 0 |
| Stripping length | 7 mm |
| Switching capacity | 5 A (DC 13) |
| Switching capacity | 3 A (AC 15) |
| Switching power | min. 60 mW |
| Switching voltage | max. 250 V AC/DC |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Typ. starting time with U s | 1 s (when controlled via A1; applicative control via A1/A2 is not permitted) |
| Typical release time | < 25 ms (on demand via the sensor circuit) |
| Typical release time | < 85 ms (Safety shut-off mat operation) |
| Typical release time | < 25 ms (When requested via A1; applicative deactivation via A1/A2 is not permitted) |
| Typical response time | < 100 ms (Automatic/manual start) |
| Typical response time | < 500 ms (Safety shut-off mat operation) |
| UNSPSC 21.0 | 39122200 |
| Weight per piece (excluding packing) | 214.83 g |
| Weight per piece (including packing) | 237.15 g |
| Width | 22.5 mm |