Parcourir les categories
Phoenix Contact PSR-ME40-4NO-2NC-24DC-SC relais de sécurité
Description
Phoenix Contact PSR-ME40-4NO-2NC-24DC-SC fait partie de la gamme PSRclassic en tant que relais de sécurité. Il se monte sur rail DIN et présente un indice de protection IP20.
Specifications
| Brand | Phoenix Contact |
|---|---|
| Model | PSR-ME40-4NO-2NC-24DC-SC |
| Order Number | 1397654 |
| Inrush current | < 2.5 A (typ. with U S, Δt = 1 ms) |
| Switching frequency | max. 0.5 Hz |
| Limiting continuous current | 6 A (Observe derating and load limit curve) |
| Power consumption at U S | typ. 1.85 W |
| Rated insulation voltage | 250 V |
| Sq. Total current | 72 A 2 (observe derating) |
| Switching voltage | min. 10 V AC/DC |
| Delay time range | 0.5 s ... 30 s ±40 % |
| Degree of protection | IP20 |
| Vibration (operation) | 10 Hz ... 150 Hz, amplitude 0.35 mm, 2 g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Application | Extension module |
| CO2e kg | 2.102 kg CO2e |
| Color (Housing) | traffic gray B (RAL 7043) |
| Conductor cross-section AWG | 24 ... 12 |
| Conductor cross-section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section rigid | 0.2 mm² ... 2.5 mm² |
| Connection method | Screw connection |
| Contact material | AgSnO 2 |
| Contact switching type | 4 enabling current paths |
| Contact switching type | 2 N/C contacts in series |
| Control | 1-channel |
| Current consumption | typ. 14 mA |
| Degree of pollution | 2 |
| Depth | 114.5 mm |
| Description of the input | safety-related |
| Designation | A1/A2 |
| ECLASS-13.0 | 27371819 |
| ECLASS-15.0 | 27371819 |
| ECLASS-15.0 ASSET | 27250101 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001449 |
| Exemption | 34, 7(a), 7(c)-I |
| Filter time | 5 ms (in the event of voltage dips at U s ) |
| Filter time | 1 ms (Test pulse width of low test pulses) |
| Filter time | 1 s (Test pulse rate for low test pulse) |
| Filter time | No brightness test pulses / high test pulses permitted. |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 112.2 mm |
| Housing material | PA |
| Identification | CE-compliant |
| Input current range "0" signal | 0 mA ... 2 mA |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 20.4 V ... 26.4 V |
| Inrush current | min. 10 mA |
| Inrush current | max. 6 A |
| Inrush current | max. 1 A |
| Limiting continuous current | 1 A |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible overall conductor resistance | 50 Ω |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Maximum power dissipation for nominal condition | 17 W (U S = 26.4 V, I L ² = 72 A², P Total max = 2.6 W + 14.4 W) |
| Mechanical service life | 10x 10 6 cycles |
| Min. degree of protection of inst. location | IP54 |
| Minimum order quantity | 1 pc |
| Mounting position | vertical or horizontal |
| Mounting type | DIN rail mounting |
| Nominal operating mode | 100% operating factor |
| Number of inputs | 1 |
| Number of outputs | 4 |
| Number of outputs | 1 |
| Operating voltage display | 1 x LED (green) |
| Output description | 2 N/O contacts each in series, safety-related, floating |
| Output description | Diagnostic contact, 2 NC in series, floating |
| Output description | 2 N/C contacts parallel, non-safety-related, floating |
| Output fuse | 10 A gL/gG |
| Output fuse | 4 A gL/gG (for low-demand applications) |
| Output fuse | 1 A gL/gG |
| Output fuse | 1 A (gL/gG) |
| Overvoltage category | II, III (See the section “Insulation coordination”) |
| Packing unit | 1 pc |
| Performance level (PL) | d |
| Pluggable | yes |
| Product key | DN1113 |
| Product type | Safety relays |
| Protective circuit | Reverse polarity protection; Suppressor diode |
| Protective circuit | Suppressor diode |
| Rated control circuit supply voltage U S | 24 V DC -15 % / +10 % |
| Rated control supply current I S | typ. 77 mA (at U S ) |
| Rated surge voltage/insulation | See data sheet, section “Insulation coordination”. |
| Recovery time | Delay time +500 ms |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Restart time | < 1 s (Boot time) |
| Safety Integrity Level (SIL) | 2 |
| Scip | 967e1333-38e4-463d-884b-216d56534510 |
| Screw thread | M3 |
| Set comprises | 1397653 PSR-ME40-4NO-2NC-24DC-SC-SET35 |
| Shock | 15g |
| Sq. Total current | 1 A 2 |
| Status display | 2 x LED (green) |
| Stop category (EN 60204-1) | 1 |
| Stripping length | 7 mm |
| Switching capacity | 5 A (AC 15) |
| Switching capacity | 6 A (DC 13) |
| Switching capacity | 1 A (AC 15) |
| Switching capacity | 1 A (DC 13) |
| Switching power | min. 100 mW |
| Switching voltage | max. 250 V AC/DC |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Typical release time | 50 ms (on demand via A1) |
| Typical response time | typ. 40 ms (For U s autostart) |
| Weight per piece (excluding packing) | 166.17 g |
| Weight per piece (including packing) | 197.1 g |
| Width | 22.5 mm |