Explorar categorias
Phoenix Contact IB IL AI 8/IS-PAC módulo analógico
Descripcion
Phoenix Contact IB IL AI 8/IS-PAC forma parte de la gama Inline como módulo analógico. Ofrece 8 canales de entrada. El producto se monta en carril DIN y tiene protección IP20.
Especificaciones
| Brand | Phoenix Contact |
|---|---|
| Model | IB IL AI 8/IS-PAC |
| Order Number | 2861661 |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Permissible voltage | max. ± 2.5 V (between analog current inputs and analog reference potential, correspond to 100 mA through the shunts) |
| Transmission speed | 500 kbps |
| Degree of protection | IP20 |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| REACH candidate substance (CAS No.) | 6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol (CAS: 119-47-1) |
| A/D conversion time | approx. 10 µs |
| A/D converter resolution | 16 bit |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| CO2e kg | 8.777 kg CO2e |
| Color (Housing) | green (RAL 6021) |
| Conductor cross-section AWG | 28 ... 16 |
| Conductor cross-section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section, rigid | 0.08 mm² ... 1.5 mm² |
| Connection method | Inline data jumper |
| Connection method | Inline shield connector |
| Connection method | Spring-cage connection |
| Connection name | Inline connector |
| Connection technology | 2-, 3-conductor |
| Current consumption | typ. 20 mA (Nominal current per channel) |
| Current consumption | max. 50 mA (per I/O connector, total current for both channels on the slot) |
| Current draw | max. 65 mA |
| Current draw | typ. 52 mA |
| Current draw | max. 40 mA |
| Current draw | typ. 31 mA |
| Current draw | max. 200 mA |
| Current draw | 0 A |
| Current input signal | 0 mA ... 20 mA |
| Current input signal | 4 mA ... 20 mA |
| Current input signal | -20 mA ... 20 mA |
| Current input signal | 0 mA ... 40 mA |
| Current input signal | -40 mA ... 40 mA |
| Data formats | IB IL, IB ST, IB RT, standardized representation, PIO format |
| Depth | 71.5 mm |
| Description of the input | Single-ended inputs, current |
| Designation | Sensor supply U iS |
| Diagnostics messages | Failure of the power supply at U ANA I/O error message |
| Diagnostics messages | I/O error Error message in the process data |
| Diagnostics messages | User error Error message in the process data |
| ECLASS-13.0 | 27242601 |
| ECLASS-15.0 | 27242601 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001596 |
| Exemption | 7(a), 7(c)-I |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 136.8 mm |
| ID code (dec.) | 95 |
| Input address area | 4 Byte |
| Input name | Analog inputs |
| Input resistance current input | 25 Ω (Shunt) |
| Installation location | Control cabinet |
| Length code (dec) | 02 |
| Length code (hex) | 02 |
| Limit frequency (3 dB) | 3.5 kHz |
| Maximum power dissipation for nominal condition | 1.55 W |
| Measured value representation | 16 bits two's complement and other |
| Measured value resolution | 16 bits (15 bits + sign bit) |
| Measuring principle | Successive approximation |
| Minimum order quantity | 1 pc |
| Mounting type | DIN rail mounting |
| Number of inputs | 8 |
| Number of interfaces | 2 |
| Operating mode | Process data operation with 2 words |
| Output address area | 4 Byte |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Packing unit | 1 pc |
| Parameter channel (PCP) | 0 Byte |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Permissible voltage | max. ± 2.5 V (between two current inputs, correspond to 100 mA through the shunts) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Process data channel | 32 bit |
| Process data update | bus-synchronous |
| Product key | DRI141 |
| Product type | I/O component |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Register length (bus) | 32 bit |
| Required configuration data | 5 Byte |
| Required parameter data | 6 Byte |
| Scip | 03432ea5-3ff4-4000-885b-8f9e596b82f2 |
| Scope of supply | including Inline connectors and marking fields |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 25g |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Special properties | integrated sensor supply |
| Stripping length | 8 mm |
| Supply voltage | 24 V DC (via voltage jumper) |
| Supply voltage | 24 V DC (via feed-in from U M ) |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Transmission physics | Copper |
| Type | modular |
| UNSPSC 21.0 | 32151600 |
| Weight per piece (excluding packing) | 125 g |
| Weight per piece (including packing) | 246.2 g |
| Width | 48.8 mm |
| Wire-break behavior | goes to 0 mA or 4 mA |