Explorar categorias
Phoenix Contact IB IL 24 PWR IN/2-F-PAC módulo de alimentación
Descripcion
Phoenix Contact IB IL 24 PWR IN/2-F-PAC forma parte de la gama Inline como módulo de alimentación. El producto se monta en carril DIN y tiene protección IP20.
Especificaciones
| Brand | Phoenix Contact |
|---|---|
| Model | IB IL 24 PWR IN/2-F-PAC |
| Order Number | 2862136 |
| Power supply | max. 6 A (sum of U M + U S ) |
| I/O voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Supply voltage | 24 V DC (via Inline connector) |
| I/O voltage | 24 V DC |
| Supply voltage range | 19.2 V ... 30 V (including all tolerances, including ripple) |
| Transmission speed | 500 kbps / 2 Mbps |
| Degree of protection | IP20 |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Color (Housing) | green (RAL 6021) |
| Conductor cross-section AWG | 28 ... 16 |
| Conductor cross-section, flexible | 0.08 mm² ... 1.5 mm² |
| Conductor cross-section, rigid | 0.08 mm² ... 1.5 mm² |
| Connection method | Inline data jumper |
| Connection method | Spring-cage connection |
| Connection name | Inline connector |
| Depth | 71.5 mm |
| ECLASS-13.0 | 27242610 |
| ECLASS-15.0 | 27242610 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001600 |
| Exemption | 7(a), 7(a)-I, 7(c)-I |
| Fulfills EU RoHS substance requirements | Yes |
| Fuse | SI 5 x 20 6, 300 AT (in scope of delivery) |
| Height | 119.8 mm |
| ID code (dec.) | none |
| Installation location | Control cabinet |
| Max. current consumption | 6 A (8 A) |
| Maximum power dissipation for nominal condition | 1.8 W |
| Minimum order quantity | 1 pc |
| Mounting type | DIN rail mounting |
| Number of interfaces | 2 |
| Number of plugs | 1 |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Packing unit | 1 pc |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Product key | DRI121 |
| Product type | I/O component |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Protective circuit | Surge protection; Suppressor diode |
| Protective circuit | Reverse polarity protection; Parallel polarity protection diode |
| Protective circuit | Overload protection, short-circuit protection in the main and segment circuits; Fuse 5 x 20 with 6.3 A, slow-blowFuses with other values can also be used. The maximum fuse value is 8 A.For fuses with a value greater than 2 A, only slow-blow fuses may be used. |
| Register length (bus) | 0 bit |
| Required configuration data | 0 Byte |
| Required parameter data | 0 Byte |
| Residual ripple | ± ±5 % |
| Scip | e55f390b-cf10-46ed-b85d-e7d81be04181 |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 25g |
| Special properties | 24 V DC |
| Special properties | U M, U S |
| Special properties | With fuse (U M, U S ) |
| Stripping length | 8 mm |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Test section | 7.5 V supply (bus logics)/24 V supply (I/O) 500 V AC 50 Hz 1 min |
| Test section | 24 V supply (I/O) / functional ground 500 V AC 50 Hz 1 min |
| Test section | 7.5 V supply (bus logic)/functional ground 500 V AC 50 Hz 1 min |
| Type | modular |
| UNSPSC 21.0 | 32151600 |
| Weight per piece (excluding packing) | 59 g |
| Weight per piece (including packing) | 79 g |
| Width | 12.2 mm |