Kategorien durchsuchen
WAGO 787-1202 Stromversorgung - Gebraucht
Beschreibung
Gebrauchte WAGO 787-1202 Stromversorgung mit Eingang AC 100 ... 240 V; 0,6 A; 50–60 Hz.
Spezifikationen
| Brand | WAGO |
|---|---|
| MPN | 787-1202 |
| HS Code | 850440 |
| Origin | China |
| Connection type | Input/output |
| Inrush current | ≤ 20 A |
| Input voltage range | 1 x 85 … 264 VAC; 125 … 375 VDC |
| Power factor | ≥ 0.5 |
| Power factor correction (PFC) | Passive |
| Power loss (max.) Pl (max.) | 5.5 W (100 VAC / 24 VDC; 1.3 A) |
| Power loss Pl | ≤ 0.43 W |
| Nominal mains frequency range | 47 … 63 Hz; 0 Hz |
| Output voltage range | 22 … 26 VDC (adjustable) |
| Weight | 239.3 g |
| Ambient temperature | -25°C ... +70°C |
| Relative humidity | ≤ 95 % (no condensation permissible) |
| Ambient temperature (operation) | -25 … +70 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Backup fuse (recommended) | Circuit breaker: 6 A (C characteristic), 10 A (B characteristic) or higher |
| Climatic category | 3K3 (per EN 60721; except for low air pressure) |
| Conformity marking | CE |
| Connection technology | Push-in CAGE CLAMP® |
| Default Setting | 24 VDC |
| Depth | 56 mm / 2.205 inches |
| Depth from upper-edge of DIN-rail | 52.5 mm / 2.067 inches |
| Derating | -2.66 %/K (> 55 °C) |
| Deviation | ≤ 1 % |
| Deviation, dynamic load change 10 … 90 % | ≤ 1 % |
| Eccn | NO US CLASSIFICATION |
| eCl@ss 10.0 | 27-04-07-01 |
| eCl@ss 9.0 | 27-04-07-01 |
| Efficiency (typ.) | 87 % (230 VAC); 82 % (110 VAC) |
| ETIM 10.0 | EC002540 |
| ETIM 9.0 | EC002540 |
| Fine-stranded conductor | 0.2 … 2.5 mm² / 24 … 12 AWG |
| Flammability class per UL94 | V0 |
| Height | 90 mm / 3.543 inches |
| Housing design | DIN-rail-mount enclosure |
| Input | AC 100 ... 240 V; 0.6 A; 50–60 Hz |
| Input current Ii | ≤ 0.6 A |
| Input voltage derating | -2 %/V (< 100 VAC); -1.33 %/V (< 140 VDC) |
| Internal fuse | T 1 A / 250 VAC |
| Isolation voltage (pri.-sec.) | 4.242 kVDC |
| Mains failure hold-up time | ≥ 70 ms |
| Mounting type | DIN-35 rail; Screw mount (back/side) |
| Mtbf | > 700,000 h (per IEC 61709) |
| Nominal input voltage Ui nom | 1 x 100 … 240 VAC |
| Nominal output current Io nom | 1.3 A |
| Nominal output power | 31.2 W |
| Nominal output voltage Uo nom | 24 VDC (SELV) |
| Open-circuit-proof | Yes |
| Operation status indicator | Green LED (Uo) |
| Output | DC 24 V; 1.3 A |
| Overload behavior | Constant power (in overload range: 1.05 … 1.35 x Io nom); Shutdown and automatic restart in the event of a short circuit or permanent overload |
| Overvoltage protection; secondary | ≤ 31 VDC (in the event of a fault) |
| Parallel operation | Yes |
| Phases | 1 |
| Pollution degree | 2 |
| Pre-fuse (required) | An external DC fuse is required for the DC input voltage. |
| Protection class | I |
| Protection type | IP20; per EN 60529 |
| PU (SPU) | 1 pcs |
| Residual ripple | ≤ 100 mV (peak-to-peak) |
| Resistance to reverse feed | ≤ 35 VDC |
| RoHS Compliance Status | Compliant,No Exemption |
| SCIP notification number (Bulgaria) | 4da49159-bd5d-44a9-b5c2-9ad5ff633f38 |
| SCIP notification number (Czech Republic) | 6304604f-d1fd-48e3-9bdc-aac6d5042e4e |
| Series operation | Yes |
| Short-circuit-protected | Yes |
| Signaling | 1 x DC OK LED (green) |
| Solid conductor | 0.2 … 2.5 mm² / 24 … 12 AWG |
| Standards/specifications | EN 61204-3; EN 60335-1; EN 62368-1; UL 60950-1; UL 508 |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
| Transient suppression (primary) | Varistor |
| Unspsc | 39,121,004 |
| WAGO connector | picoMAX® 5.0, WAGO 2092 Series |
| Width | 54 mm / 2.126 inches |