Kategorien durchsuchen
Phoenix Contact AXL SE RTD4 PT100 Temperaturmodul
Beschreibung
Phoenix Contact AXL SE RTD4 PT100 gehört als Temperaturmodul zur Reihe Axioline Smart Elements. Es wird in einen Smart-Element-Steckplatz eingesetzt und hat die Schutzart IP20.
Spezifikationen
| Brand | Phoenix Contact |
|---|---|
| Model | AXL SE RTD4 PT100 |
| Order Number | 1088106 |
| Supply voltage | using card edge connectors |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Degree of protection | IP20 |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| A/D converter resolution | 16 bit |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Application | Detection of Pt 100 temperature sensors |
| Color (Housing) | gray (RAL 7042) |
| Conductor cross-section AWG | 24 ... 16 |
| Conductor cross-section, flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, rigid | 0.25 mm² ... 1.5 mm² |
| Connection method | Card edge connector |
| Connection method | Push-in connection |
| Connection name | I/O |
| Connection technology | 3-conductor |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Current consumption | min. 5 mA (without connected peripherals) |
| Current draw | max. 12 mA |
| Current draw | typ. 8 mA |
| Data formats | Standardized representation |
| Depth | 62 mm |
| Description of the input | Inputs for resistive temperature sensors |
| ECLASS-13.0 | 27242601 |
| ECLASS-15.0 | 27242601 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001596 |
| Exemption | 7(a), 7(c)-I, 7(c)-II |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 62.2 mm |
| Input address area | 8 Byte |
| Input name | Analog RTD inputs |
| Maximum power dissipation for nominal condition | 0.4 W |
| Measured value representation | 16 bits (15 bits + sign bit) |
| Minimum order quantity | 1 pc |
| Mounting position | See the system in which the Smart Element is used. |
| Mounting type | Plug-in mounting (Smart Element slot) |
| Nominal value of the current sources | 1 mA (pulsed current, the data is valid during the sampling phase) |
| Number of inputs | 4 (Pt 100) |
| Number of interfaces | 1 |
| Output address area | 0 Byte |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Packing unit | 1 pc |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Process data channel | 64 bit |
| Process data update | typ. 1 ms |
| Product key | DRIB43 |
| Product type | I/O component |
| Protection | See the system in which the Smart Element is used. |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Protective circuit | Overload protection; max. ±40 V DC, 1 min. |
| Protective circuit | Transient protection |
| Protective circuit | Surge protection; See the system in which the Smart Element is used. |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Required configuration data | 6 Byte |
| Required parameter data | 24 Byte |
| Scip | 86f43deb-d15d-404d-8cf4-cbb255172da5 |
| Sensor types (RTD) that can be used | Pt 100 (IEC 60751/EN 60751) |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Start time until ready to operate | < 1000 ms |
| Stripping length | 8 mm |
| Supply voltage | 24 V DC (using card edge connectors) |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Tolerance, relative | typ. 0.05 % (Measuring range: -200°C ... 400°C, based on the positive upper range value of 850°C) |
| Tolerance, relative | max. 0.1 % (Measuring range: -200°C ... 400°C, based on the positive upper range value of 850°C) |
| Tolerance, relative | typ. 0.1 % (Measuring range: -200°C ... 850°C, based on the positive upper range value of 850°C) |
| Tolerance, relative | max. 0.2 % (Measuring range: -200°C ... 850°C, based on the positive upper range value of 850°C) |
| Type | modular |
| UNSPSC 21.0 | 32151600 |
| Weight per piece (excluding packing) | 35 g |
| Weight per piece (including packing) | 39.8 g |
| Width | 14.9 mm |