Kategorien durchsuchen
Phoenix Contact AXL SE DO4/2 2A EF E/A-Modul für Digitalausgang
Beschreibung
Das E/A-Modul Phoenix Contact AXL SE DO4/2 2A EF bietet 4 digitale Ausgänge.
Spezifikationen
| Brand | Phoenix Contact |
|---|---|
| Model | AXL SE DO4/2 2A EF |
| Order Number | 1181790 |
| Supply voltage | 24 V DC |
| Switching frequency | max. 1200 per second (With resistive load, at least 50 mA load current) |
| Nominal output voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Degree of protection | IP20 |
| Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6 | 5g |
| REACH candidate substance (CAS No.) | Lead (CAS: 7439-92-1) |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Behavior with inductive overload | Output can be destroyed |
| Behavior with overload | Shutdown with automatic restart |
| CO2e kg | 4.062 kg CO2e |
| Color (Housing) | gray (RAL 7042) |
| Conductor cross-section AWG | 24 ... 16 |
| Conductor cross-section, flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, flexible, with ferrule, without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section, rigid | 0.25 mm² ... 1.5 mm² |
| Connection method | Card edge connector |
| Connection method | Push-in connection |
| Connection name | I/O |
| Connection technology | 2-conductor |
| Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 10g |
| Current consumption | min. 12 mA (without actuators) |
| Current draw | max. 8 A (provide external protection) |
| Depth | 62 mm |
| Design of digital output | Semiconductor |
| ECLASS-13.0 | 27242604 |
| ECLASS-15.0 | 27242604 |
| Environment friendly use period (EFUP) | EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. |
| ETIM 10.0 | EC001599 |
| Exemption | 7(a), 7(c)-I |
| Fulfills EU RoHS substance requirements | Yes |
| Height | 62.2 mm |
| Input address area | 1 Byte |
| Load min. | 10 kΩ |
| Max. current carrying capacity per output | max. 2 A (Observe the derating.) |
| Maximum output current per module | max. 8 A (provide external fuse protection; observe the derating.) |
| Maximum power dissipation for nominal condition | 2.05 W |
| Minimum order quantity | 1 pc |
| Mounting position | See the system in which the Smart Element is used. |
| Mounting type | Plug-in mounting (Smart Element slot) |
| Nominal load, inductive | 48 VA (1.2 H, 12 Ω, at 24 V DC) |
| Nominal load, lamp | 24 W (at 24 V DC) |
| Nominal load, ohmic | 48 W (12 Ω, in the supply voltage range) |
| Number of interfaces | 1 |
| Number of outputs | 4 |
| Output address area | 1 Byte |
| Output current when switched off | max. 300 µA |
| Output current with ground connection interrupt when switched off | < 1 mA |
| Output name | Digital outputs |
| Output voltage | 24 V DC |
| Output voltage when switched off | max. 1 V |
| Overcurrent shut-down | min. 2.8 A |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Packing unit | 1 pc |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Process data channel | 8 bit |
| Product key | DRIB32 |
| Product type | I/O component |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Protective circuit | Short-circuit and overload protection; electronic |
| Protective circuit | Surge protection; electronic (35 V, 0.5 s) |
| Protective circuit | Reverse polarity protection; parallel diode |
| Required configuration data | 7 Byte |
| Required parameter data | 3 Byte |
| Scip | 4108ee54-b82c-43ac-8372-2a6c8e6c42ee |
| Shock in accordance with EN 60068-2-27/IEC 60068-2-27 | 30g |
| Signal delay | max. 100 µs (when switched on) |
| Signal delay | max. 100 µs (when switched off, with at least 50 mA load current) |
| Special properties | The product is being prepared for compliance with the Cyber Resilience Act (CRA) |
| Start time until ready to operate | < 500 ms |
| Stripping length | 8 mm |
| Supply voltage | using card edge connectors |
| Switching frequency | max. 1 per second (with inductive load) |
| Switching frequency | max. 4 per second (with nominal lamp load) |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Test voltage | 500 V AC, 50 Hz, 1 min |
| Type | modular |
| UNSPSC 21.0 | 32151600 |
| Weight per piece (excluding packing) | 38.2 g |
| Weight per piece (including packing) | 38.1 g |
| Width | 14.9 mm |