Kategorien durchsuchen
Panasonic PM-L45-P Photoelektrischer Sensor - Neu
Beschreibung
Panasonic PM-L45-P Photoelektrischer Sensor. Neu, ungeöffnet, mit Originalverpackung, Handbuch und komplettem Kabelbaum. Unterstützt 5 bis 24 V DC ±10 % Restwelligkeit P-P ≤10 % Versorgungsspannung.
Spezifikationen
| Brand | Panasonic |
|---|---|
| Model | PM-L45-P |
| Origin | Japan |
| Supply voltage | 5 to 24 V DC ±10 % Ripple P-P ≤10 % |
| Response time | Under light received condition: 20 μs or less Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) |
| Sensing range | 6 mm 0.236 in (fixed) |
| Weight | Net weight: 10 g approx. Gross weight: 15 g approx. |
| Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉ |
| Short-circuit protection | Incorporated |
| Vibration resistance | 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each |
| Ambient humidity | 5 to 85 % RH, Storage: 5 to 95 % RH |
| Ambient illuminance | Fluorescent light: 1,000 ℓx at the light-receiving face |
| Cable | 0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long |
| Current consumption | ≤15 mA |
| Emitting element | Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated) |
| Hysteresis | 0.05 mm 0.002 in or less |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Material | Enclosure: PBT Display section: Polycarbonate |
| Minimum sensing object | 0.8 × 1.2 mm 0.031 × 0.047 in opaque object |
| Operation indicator | Orange LED (lights up under light received condition) |
| Output | PNP open-collector transistor・Maximum source current: 50 mA・Applied voltage: 30 V DC or less (between output and + V)・Residual voltage: ≤2 V (at 50 mA source current), ≤1 V (at 16 mA source current) |
| Output operation | Incorporated with 2 outputs: Light-ON / Dark-ON |
| Pollution degree | 3 |
| Protection | IP64 (IEC) |
| Quantity | 10 |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
| Repeatability | 0.01 mm 0.0004 in or less |
| Shock resistance | 15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions three times each |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Wiring length | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher. (Note 2) : For safety applications, do not exceed 30 m 98.425 ft. |