Kategorien durchsuchen
Beckhoff EL2596-0030 EtherCAT-Klemme LED-Ausgang
Beschreibung
Die Beckhoff EtherCAT-Klemme EL2596-0030 stellt einen einzelnen LED-Ausgang bereit, der je nach Ausgangsspannung und Tastverhältnis für 0…3 A im Pulsbetrieb und 0…1,2 A im Dauerbetrieb ausgelegt ist.
Spezifikationen
| Brand | Beckhoff |
|---|---|
| MPN | EL2596-0030 |
| Input voltage | 24 V DC (-15%/+20%) |
| Max. output current | 0…3 A in pulsed mode (depending on output voltage and duty cycle) 0…1.2 A in continuous mode |
| Weight | approx. 55 g |
| Operating temperature | 0…55 °C |
| Storage temperature | -25…+85 °C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Approvals/markings | CE |
| Calibration certificate (analog) | externally calibrated |
| Connection technology | 2-wire |
| Current consumption E-bus | typ. 240 mA |
| Current consumption power contacts | – |
| Distributed clocks | yes |
| Electrical isolation | 500 V (E-bus/field potential) |
| Load type | LED (ohmic) |
| Number of outputs | 1 |
| Output voltage | continuous light mode : 0…U IN continuous light operation PWM: 0…(U IN - 0.5 V) pulsed operation (0…2 A): 0…(U IN - 2 V) pulsed operation (3 A*): 0…(U IN - 3 V) *linear behavior of the maximum output voltage between 2 A and 3 A |
| Protect. rating/installation pos. | IP20/see documentation |
| Switching times | typ. T ON : < 1 µs, typ. T OFF : < 1 µs, pulses from 25 µs…10 s |
| Trigger input (from camera) | 1 (electrically isolated, typ. 3 mA, 4…24 V DC, switchable sensitivity) |
| Trigger output (to camera) | 1 (electrically isolated, max. 10 mA push-pull, 10…24 V DC, voltage adjustable via externally connectable voltage distributor) |